Inherent strain approach to estimate residual stress and deformation in the laser powder bed fusion process for metal additive manufacturing—a state-of-the-art review

被引:0
|
作者
Hossein Mohammadtaheri
Ramin Sedaghati
Marjan Molavi-Zarandi
机构
[1] Concordia University,Department of Mechanical, Industrial & Aerospace Engineering
[2] National Research Council Canada (NRC),undefined
来源
The International Journal of Advanced Manufacturing Technology | 2022年 / 122卷
关键词
Metal additive manufacturing; Laser powder bed fusion; Inherent strain method; Finite element method;
D O I
暂无
中图分类号
学科分类号
摘要
In recent years, metal additive manufacturing (AM) and particularly the laser powder bed fusion (LPBF) process have substantially grown in popularity in industrial applications due to its unique ability to produce a wide variety of components with complex geometry. The LPBF process is now an integral part of digital manufacturing and the industry 4.0 concept. However, a considerable amount of residual stress and deformation induced by the fast and intense heating/cooling cycle as well as phase change in each layer are still some important technical barriers in the LPBF process, giving rise to increasing inaccuracy and structural failure in some cases. Developing an efficient physics-based simulation model capable of predicting the induced residual stresses is, thus, of paramount importance to build parts with minimal distortion in a wide range of applications, while avoiding expensive and time-consuming experimental procedures. The simulation model also is efficiently utilized to investigate the effect of process parameters, material, and geometry on the development and redesign of parts. In the last decade, multi-scale process modeling frameworks have been developed to predict the residual stress and deformation cost-effectively in the parts fabricated by LPBF. The purpose of this survey is to systematically provide an in-depth overview of the inherent strain modeling approach with a focus more on the methodology development, highlighting the positive outcomes and limitations of recent investigations, followed by presenting potential future work to optimize this technique.
引用
收藏
页码:2187 / 2202
页数:15
相关论文
共 50 条
  • [41] Review on the evolution and technology of State-of-the-Art metal additive manufacturing processes
    Kumar, S. Pratheesh
    Elangovan, S.
    Mohanraj, R.
    Ramakrishna, J. R.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 7907 - 7920
  • [42] Process monitoring for material extrusion additive manufacturing: a state-of-the-art review
    Oleff, Alexander
    Kuester, Benjamin
    Stonis, Malte
    Overmeyer, Ludger
    PROGRESS IN ADDITIVE MANUFACTURING, 2021, 6 (04) : 705 - 730
  • [43] Process monitoring for material extrusion additive manufacturing: a state-of-the-art review
    Alexander Oleff
    Benjamin Küster
    Malte Stonis
    Ludger Overmeyer
    Progress in Additive Manufacturing, 2021, 6 : 705 - 730
  • [44] Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling
    Chowdhury, Sohini
    Yadaiah, N.
    Prakash, Chander
    Ramakrishna, Seeram
    Dixit, Saurav
    Gulta, Lovi Raj
    Buddhi, Dharam
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 2109 - 2172
  • [45] An efficient framework for printability assessment in Laser Powder Bed Fusion metal additive manufacturing
    Zhang, Bing
    Seede, Raiyan
    Xue, Lei
    Atli, Kadri C.
    Zhang, Chen
    Whitt, Austin
    Karaman, Ibrahim
    Arroyave, Raymundo
    Elwany, Alaa
    ADDITIVE MANUFACTURING, 2021, 46
  • [46] Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing
    Sing, S. L.
    Kuo, C. N.
    Shih, C. T.
    Ho, C. C.
    Chua, C. K.
    VIRTUAL AND PHYSICAL PROTOTYPING, 2021, 16 (03) : 372 - 386
  • [47] Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
    Mahmoudi, Mohamad
    Ezzat, Ahmed Aziz
    Elwany, Alaa
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2019, 141 (03):
  • [48] A cybermanufacturing and AI framework for laser powder bed fusion (LPBF) additive manufacturing process
    Amini, Mohammadhossein
    Chang, Shing, I
    Rao, Prahalada
    MANUFACTURING LETTERS, 2019, 21 : 41 - 44
  • [49] APPLICATION OF DIGITAL TWINS TO LASER POWDER BED FUSION ADDITIVE MANUFACTURING PROCESS CONTROL
    Yeung, Ho
    Kim, Felix
    Donmez, Alkan
    PROCEEDINGS OF ASME 2023 18TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, MSEC2023, VOL 1, 2023,
  • [50] Powder Bed Based Laser Additive Manufacturing Process of Stainless Steel: A Review
    Adeyemi, Adebola
    Akinlabi, Esther T.
    Mahamood, Rasheedat M.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 18510 - 18517