Nonisothermal warm deep drawing of SS304: FE modeling and experiments using servo press

Experimental and viscoplastic finite element analysis (FEA) of thermo-mechanical plastic deformation in nonisothermal warm deep drawing is studied using SS304. A nonisothermal deep drawing tool is used in a servo-motor-controlled press. Drawability window of SS304 under elevated temperatures (25–225 °C) and low to high strain rates (drawing speeds of 2.5, 25, and 50 mm/s) were determined. A viscoplastic thermal material model is adopted for nonwork softening material behaviors, as seen in low-temperature forming of SS304, and found to be easily applicable and quite satisfactory. Tensile and equi-biaxial bulge tests were conducted for more accurate flow stress data to be used in FEA. Measured punch load–stroke and cup’s curvilinear thickness (rolling/transverse) curves were successfully compared with predictions from the nonisothermal FE model of the warm deep drawing.