Treatment of phenolic wastewater by anaerobic fluidized bed microbial fuel cell using carbon brush as anode: microbial community analysis and m-cresol degradation mechanism

Anaerobic fluidized bed microbial fuel cell (AFB-MFC) is a technology that combines fluidized bed reactor and microbial fuel cell to treat organic wastewater and generate electricity. The performance and the mechanism of treating m-cresol wastewater in AFB-MFC using carbon brush as biofilm anode were studied. After 48 h of operation, the m-cresol removal efficiency of AFB-MFC, MAR-AFB (fluidized bed bioreactor with acclimated anaerobic sludge), MAR-FB (ordinary fluidized bed reactor with only macroporous adsorptive resin) and AST (traditional anaerobic sludge treatment) were 95.29 ± 0.67%, 85.78 ± 1.81%, 71.24 ± 1.86% and 70.41 ± 0.32% respectively. The maximum output voltage and the maximum power density of AFB-MFC using carbon brush as biofilm anode were 679.7 mV and 166.6 mW/m2 respectively. The results of high-throughput sequencing analysis indicated the relative abundance of dominant electroactive bacteria, such as Trichococcus, Geobacter, and Pseudomonas, on the anode carbon brushes was higher than that of AST, and also identified such superior m-cresol-degrading bacteria as Bdellovibrio, Thermomonas, Hydrogenophaga, etc. Based on the determination of m-cresol metabolites detected by Gas Chromatography–Mass Spectrometry (GC–MS), the possible biodegradation pathway of m-cresol under anaerobic and aerobic conditions in AFB-MFC was speculated. The results showed that m-cresol was decomposed into formic acid–acetic anhydride and 3-methylpropionic acid under the action of electrochemistry, which is a simple degradation pathway without peripheral metabolism in AFB-MFC.