Investigation on Zener-Hollomon parameter in the warm-hot deformation behavior of 20CrMnTi

被引：21
|
作者：
Yang H. [1 ]
Li Z.-H. [1 ]
Zhang Z.-L. [1 ]
机构：
[1] Department of Plasticity Technology, Shanghai Jiaotong University
来源：
J Zhejiang Univ: Sci | 2006年 / 8卷 / 1453-1460期
关键词：
20CrMnTi; Grain size; Warm-hot deformation; Zener-Hollomon parameter;
D O I：
10.1631/jzus.2006.A1453
中图分类号：
学科分类号：
摘要：
The warm-hot deformation behavior of 20CrMnTi steel was studied with hot compression tests at temperature range of 1123-1273 K and strain rate of 0.1-20 s-1. The activation energy for warm-hot deformation is 426.064 KJ/mol. The influences of Zener-Hollomon parameter, strain and grain size imposing on the flow stress were analyzed in the temperature range of warm-hot forging. Creep theory and mathematical theory of statistics were used to obtain mathematical models of flow stress. The research and results provide scientific basis for controlling microstructure of forging process through Zener-Hollomon parameter.
引用
收藏
页码：1453 / 1460
页数：7
相关论文
共 40 条
  • [21] EXAMINATION OF HIGH-TEMPERATURE DEFORMATION BEHAVIORS IN TITANIUM-ALLOYS BY MEANS OF ZENER-HOLLOMON PARAMETER
    NISHIMOTO, M
    TAKAHASHI, W
    SHIDA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1992, 78 (08): : 1398 - 1405
  • [22] The analysis of hot deformation behavior of powder metallurgy Ti-10V-2Fe-3Al alloy using activation energy and Zener-Hollomon parameter
    Zygula, Krystian
    Wojtaszek, Marek
    Sleboda, Tomasz
    Lypchanskyi, Oleksandr
    Ruminski, Maciej
    Korpala, Grzegorz
    Prahl, Ulrich
    18TH INTERNATIONAL CONFERENCE ON METAL FORMING 2020, 2020, 50 : 546 - 551
  • [23] Characterization of hot workability of IN617B alloy using activation energy, Zener-Hollomon parameter and hot processing maps
    Luo, Rui
    Zhou, Yiming
    Gao, Pei
    Liu, Tian
    Cao, Yu
    Ding, Hengnan
    Lin, Wei
    Liu, Qingtao
    Tian, Tian
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 5141 - 5150
  • [24] Study on hot deformation characteristics of 12%Cr ultra-super-critical rotor steel using processing maps and Zener-Hollomon parameter
    Wang, Zhenhua
    Fu, Wantang
    Wang, Baozhong
    Zhang, Wenhui
    Lv, Zhiqing
    Jiang, Ping
    MATERIALS CHARACTERIZATION, 2010, 61 (01) : 25 - 30
  • [25] Effect of Zener-Hollomon parameters on hot deformation behavior of Cr4Mo4Ni4V high alloy steel
    Ma S.
    Zhang Y.
    Yang M.
    Li B.
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2021, 52 (02): : 376 - 388
  • [26] Deformation Mechanisms and Processing Maps for High Entropy Alloys (Presentation of Processing Maps in Terms of Zener-Hollomon Parameter): Review
    Jeong, Hee-Tae
    Kim, Woo Jin
    MATERIALS, 2023, 16 (03)
  • [27] The dependence of Zener-Hollomon parameter on softening behavior and dynamic recrystallization mechanism of a biodegradable Zn-Cu-Mg alloy
    Pan, Peng
    Chen, Chao
    Wang, Guohua
    Ning, Kao
    Shu, Zhongliang
    Zhang, Jiaqi
    Zhang, Taomei
    Li, Dan
    Gao, Lu
    Geng, Zhaowen
    Song, Li
    Zou, Weimin
    Zhang, Yingzhe
    Liu, Jianling
    Zhou, Kechao
    INTERNATIONAL JOURNAL OF PLASTICITY, 2024, 182
  • [28] Recrystallization mechanism and the relationship between grain size and Zener-Hollomon parameter of Mg-Al-Zn-Ca alloys during hot compression
    Xu, S. W.
    Kamado, S.
    Honma, T.
    SCRIPTA MATERIALIA, 2010, 63 (03) : 293 - 296
  • [29] Explore the corrosion behavior of Al-Mg-Si-Cu alloy with various microstructure characteristics through controlling Zener-Hollomon parameter
    Feng, Xinming
    Wang, Xuefei
    Liu, Honglei
    Luo, Hong
    Zhang, Zhihao
    MATERIALS CHARACTERIZATION, 2024, 217
  • [30] Effects of holding time and Zener-Hollomon parameters on deformation behavior of cast Mg-8Gd-3Y alloy during double-pass hot compression
    Xi Nie
    Shuai Dong
    Fenghua Wang
    Li Jin
    Jie Dong
    JournalofMaterialsScience&Technology, 2018, 34 (11) : 2035 - 2041
1234