Numerical analysis of heat generation and temperature field in reverse dual-rotation friction stir welding

被引：0
|
作者：
L. Shi
C. S. Wu
H. J. Liu
机构：
[1] Shandong University,MOE Key Lab for Liquid
[2] Harbin Institute of Technology,Solid Structure Evolution and Materials Processing, Institute of Materials Joining
来源：
The International Journal of Advanced Manufacturing Technology | 2014年 / 74卷
关键词：
Heat generation; Temperature field; Reverse dual-rotation friction stir welding; Numerical analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A 3D model is developed for numerical analysis for heat generation, temperature field, and material flow in reverse dual-rotation friction stir welding (RDR-FSW) process. The reverse rotation of the assisted shoulder and the tool pin is considered to determine the heat generation rate. Friction heat, plastic deformation heat, and their partition coefficients are analyzed. Due to the tool pin and assisted shoulder being separated and reversely rotated independently, the temperature difference between the advancing and retreating sides is weakened. The reverse material flow is beneficial to the uniformity of both the temperature and microstructure at the advancing and retreating sides. The calculated temperature profiles agree well with the corresponding experimentally measured values.
引用
收藏
页码：319 / 334
页数：15
相关论文
共 50 条
  • [21] Optimization of welding parameters for the reverse dual-rotation friction stir welding of a high-strength aluminum alloy 2219-T6
    Li, J. Q.
    Liu, H. J.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 76 (5-8): : 1469 - 1478
  • [22] Effects of welding speed on microstructures and mechanical properties of AA2219-T6 welded by the reverse dual-rotation friction stir welding
    Li, J. Q.
    Liu, H. J.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 68 (9-12): : 2071 - 2083
  • [23] Optimization of welding parameters for the reverse dual-rotation friction stir welding of a high-strength aluminum alloy 2219-T6
    J. Q. Li
    H. J. Liu
    The International Journal of Advanced Manufacturing Technology, 2015, 76 : 1469 - 1478
  • [24] Effects of welding speed on microstructures and mechanical properties of AA2219-T6 welded by the reverse dual-rotation friction stir welding
    J. Q. Li
    H. J. Liu
    The International Journal of Advanced Manufacturing Technology, 2013, 68 : 2071 - 2083
  • [25] A Modified Analytical Heat Source Model for Numerical Simulation of Temperature Field in Friction Stir Welding
    Liu, Xiangqian
    Yu, Yan
    Yang, Shengli
    Liu, Huijie
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [26] Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding
    Wu Chuansong
    Su Hao
    Shi Lei
    ACTA METALLURGICA SINICA, 2018, 54 (02) : 265 - 277
  • [27] Dissimilar Aluminium Alloys Welding by Friction Stir Processing and Reverse Rotation Friction Stir Processing
    Jweeg, Muhsin J.
    Resan, Kadhim K.
    Abbod, Esraa A.
    Al-Waily, Muhannad
    INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND SCIENCE, 2018, 454
  • [28] Determination of heat generation by correlating the interfacial friction stress with temperature in friction stir welding
    Sun, Z.
    Wu, C. S.
    Kumar, S.
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 31 : 801 - 811
  • [29] The Numerical Simulation of Temperature Field in Friction Stir Welding of 7075 Aluminium Alloy
    Ma, F. J.
    Fu, D. Y.
    Liu, Y.
    Yang, D. P.
    Zhang, S. F.
    Sha, Z. H.
    2019 5TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AERONAUTICAL ENGINEERING (ICMAE 2019), 2020, 751
  • [30] An analytical model for the heat generation in friction stir welding
    Schmidt, H
    Hattel, J
    Wert, J
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2004, 12 (01) : 143 - 157
12345