The influence of deformation conditions on the structure and hardening of cast iron surface layer in machining with combined carbide broaches

被引：0
|
作者：
S. F. Studenets’
P. M. Eryomin
O. V. Chernyavs’kyi
机构：
[1] National Academy of Sciences of Ukraine,Bakul Institute for Superhard Materials
[2] Kirovohrad National Technical University,undefined
来源：
Journal of Superhard Materials | 2015年 / 37卷
关键词：
tungsten carbide; deforming–cutting broaching; graphite-containing cast iron; cold plastic deformation; surface structure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The behavior of the metal matrix and graphite inclusions during the cold plastic deformation of the surface layer during the cold plastic deformation of graphite-containing cast iron specimens by carbide tools is studied using testing and metallographic equipment as well as a modern electron scanning microscope.
引用
收藏
页码：282 / 288
页数：6
相关论文
共 50 条
  • [31] INFLUENCE OF THE STRUCTURE OF POLYMER MATERIAL ON MODIFICATION OF THE SURFACE LAYER OF IRON COUNTERFACE IN TRIBOLOGICAL CONTACT
    Bielinski, Dariusz M.
    Sicinski, Mariusz
    Grams, Jacek
    Wiatrowski, Michal
    HIGH PERFORMANCE ELASTOMER MATERIALS: AN ENGINEERING APPROACH (ELASTOMERS), 2015, : 169 - 184
  • [32] INFLUENCE OF OXIDATION ON THE COMPOSITION AND STRUCTURE OF THE SURFACE-LAYER OF HOT-PRESSED BORON-CARBIDE
    LAVRENKO, VA
    GOGOTSI, YG
    OXIDATION OF METALS, 1988, 29 (3-4): : 193 - 202
  • [33] Influence of boundary conditions on the structure of laminar boundary layer with hydrogen combustion on a permeable surface
    Volchkov, E. P.
    Terekhov, V. V.
    Terekhov, V. I.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (17-18) : 4090 - 4094
  • [34] Theoretical Investigation of the Influence of Combined Machining Modes on the Value and Character of Residual Stresses in the Surface Layer of Cylindrical Friction Pairs
    A. P. Yakovleva
    A. Yu. Albagachiev
    Journal of Machinery Manufacture and Reliability, 2020, 49 : 237 - 242
  • [35] Theoretical Investigation of the Influence of Combined Machining Modes on the Value and Character of Residual Stresses in the Surface Layer of Cylindrical Friction Pairs
    Yakovleva, A. P.
    Albagachiev, A. Yu.
    JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2020, 49 (03) : 237 - 242
  • [36] Fabrication of a novel molybdenum carbide composite coating with double-layer structure on cast iron via in situ solid-phase diffusion
    Bai, Haiqiang
    Zhong, Lisheng
    Kang, Ling
    Zhuang, Weijun
    Lv, ZhenLin
    Xu, Yunhua
    MATERIALS CHARACTERIZATION, 2022, 183
  • [37] Remarkable influence of surface composition and structure of oxidized iron layer on orange I decomposition mechanisms
    Atenas, GM
    Mielczarski, E
    Mielezarski, JA
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2005, 289 (01) : 171 - 183
  • [38] INFLUENCE OF SURFACE ACTIVE MEDIUM ON CHANGE OF FINE CRYSTAL STRUCTURE OF IRON WHEN HARDENED BY PLASTIC DEFORMATION
    KOSTETSKII, BI
    KOLESNICHENKO, LF
    DOKLADY AKADEMII NAUK SSSR, 1964, 157 (04): : 845 - &
  • [39] Assessment of the surface integrity of ground cemented tungsten carbide cutting inserts and its influence on tool wear in turning of ferritic nodular cast iron
    Cruz, D. C.
    Sordi, V. L.
    Ventura, C. E. H.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 : 613 - 622
  • [40] Influence of Cutting Parameters in Face Milling of Nodular Cast Iron Grade 500 Using Carbide Tool Affect the Surface Roughness and Tool Wear
    Rawangwong, S.
    Boonchouytan, W.
    Burapa, R.
    Chatthong, J.
    2013 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT (IEEM 2013), 2013, : 771 - 775
12345