Finite element modeling of grain growth by point tracking method in friction stir welding of AA6082-T6

被引：0
|
作者：
Z. Y. Wan
Z. Zhang
X. Zhou
机构：
[1] Dalian University of Technology,Department of Engineering Mechanics, State Key Laboratory of Structural Analysis for Industrial Equipment, Faculty of Vehicle Engineering and Mechanics
来源：
The International Journal of Advanced Manufacturing Technology | 2017年 / 90卷
关键词：
Friction stir welding; Coupled thermo-mechanical model; Material flow; Grain size;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A thermo-mechanical re-meshing model of friction stir welding (FSW) process of AA6082-T6 is used with a point tracking method for the determination of the final locations of the particles. The relations between the field variables and the material flows in the FSW process are discussed. Then the grain sizes after recrystallization are calculated. The comparison with the numerical and the experimental results in published literatures shows the validity of the proposed model. Based on the Zener-Hollomon parameter, the effects of strain rate and temperature on recrystallization are further discussed.
引用
收藏
页码：3567 / 3574
页数：7
相关论文
共 50 条
  • [31] Internal Material Flow Layers in AA6082-T6 Butt-Joints during Bobbin Friction Stir Welding
    Tamadon, Abbas
    Pons, Dirk J.
    Clucas, Don
    Sued, Kamil
    METALS, 2019, 9 (10)
  • [32] Development of a welding platform and tool for the study of weld and process parameters, during continuous friction stir welding of AA6082-T6 sheets
    Chikamhi, P. P.
    Hattingh, D. G.
    Dreyer, B.
    CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018), 2018, 430
  • [33] Exploring temperature and stress dynamics in AA 6082-T6 friction stir welding: a comprehensive experimental and finite element analysis
    Shimpi, Rajendra
    Kumar, Cheruku Sandesh
    Katarne, Rajnish
    Interactions, 2024, 245 (01)
  • [34] A Study on Optimization of Welding Parameters and their Effect on Joint Properties of Dissimilar AA6082-T6 and AA7050-T7 Friction Stir Welds
    Singh A.
    Upadhyay V.
    Journal of The Institution of Engineers (India): Series D, 2021, 102 (02) : 249 - 269
  • [35] AA6082-T6 friction stir welded joints fatigue resistance: influence of process parameters
    Cirello, A.
    Buffa, G.
    Fratini, L.
    Pasta, S.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2006, 220 (06) : 805 - 811
  • [36] Fatigue properties of combined friction stir and adhesively bonded AA6082-T6 overlap joints
    Maciel, Ricardo
    Bento, Tiago
    Braga, Daniel F. O.
    da Silva, Lucas F. M.
    Moreira, Pedro M. G. P.
    Infante, Virginia
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2020, 43 (09) : 2169 - 2180
  • [37] Determination of Defect-Free Working Range of Friction Stir Processing for AA6082-T6
    Sarvaiya, Jainesh
    Singh, Dinesh
    RECENT ADVANCES IN SMART MANUFACTURING AND MATERIALS, ICEM 2020, 2021, : 327 - 339
  • [38] Influence of Process Parameters on the Vertical Forces Generated during Friction Stir Welding of AA6082-T6 and on the Mechanical Properties of the Joints
    Forcellese, Archimede
    Simoncini, Michela
    Casalino, Giuseppe
    METALS, 2017, 7 (09)
  • [39] Effect of process parameters on friction stir welding of aluminium alloy AA6082-T6 with an interlayer using response surface methodology
    Singh, Avtar
    Kumar, Vinod
    Grover, Neel Kanth
    ENGINEERING RESEARCH EXPRESS, 2023, 5 (04):
  • [40] Friction Stir Welding Tool Design and Their Effect on Welding of AA-6082 T6
    Ullegaddi, Kalmeshwar
    Murthy, Veeresh
    Harsha, R. N.
    Manjunatha
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 7962 - 7970
12345