Finite element modeling of grain growth by point tracking method in friction stir welding of AA6082-T6

被引：0
|
作者：
Z. Y. Wan
Z. Zhang
X. Zhou
机构：
[1] Dalian University of Technology,Department of Engineering Mechanics, State Key Laboratory of Structural Analysis for Industrial Equipment, Faculty of Vehicle Engineering and Mechanics
来源：
The International Journal of Advanced Manufacturing Technology | 2017年 / 90卷
关键词：
Friction stir welding; Coupled thermo-mechanical model; Material flow; Grain size;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A thermo-mechanical re-meshing model of friction stir welding (FSW) process of AA6082-T6 is used with a point tracking method for the determination of the final locations of the particles. The relations between the field variables and the material flows in the FSW process are discussed. Then the grain sizes after recrystallization are calculated. The comparison with the numerical and the experimental results in published literatures shows the validity of the proposed model. Based on the Zener-Hollomon parameter, the effects of strain rate and temperature on recrystallization are further discussed.
引用
收藏
页码：3567 / 3574
页数：7
相关论文
共 50 条
  • [1] Finite element modeling of grain growth by point tracking method in friction stir welding of AA6082-T6
    Wan, Z. Y.
    Zhang, Z.
    Zhou, X.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 90 (9-12): : 3567 - 3574
  • [2] Finite element modeling of grain growth by point tracking method in friction stir welding of AA6082-T6
    Wan, Z.Y.
    Zhang, Z.
    Zhou, X.
    International Journal of Advanced Manufacturing Technology, 2017, 90 (9-12): : 3567 - 3574
  • [3] Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6
    Z. Zhang
    Q. Wu
    M. Grujicic
    Z. Y. Wan
    Journal of Materials Science, 2016, 51 : 1882 - 1895
  • [4] Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6
    Zhang, Z.
    Wu, Q.
    Grujicic, M.
    Wan, Z. Y.
    JOURNAL OF MATERIALS SCIENCE, 2016, 51 (04) : 1882 - 1895
  • [5] Atypical grain coarsening of friction stir welded AA6082-T6: Characterization and modeling
    Huang, Yongxian
    Xie, Yuming
    Meng, Xiangchen
    Li, Junchen
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 740 : 211 - 217
  • [6] Thermomechanical Grain Refinement in AA6082-T6 Thin Plates under Bobbin Friction Stir Welding
    Tamadon, Abbas
    Pons, Dirk J.
    Sued, Kamil
    Clucas, Don
    METALS, 2018, 8 (06)
  • [7] Precipitation-Induced Grain Growth Simulation of Friction-Stir-Welded AA6082-T6
    Q. Wu
    Z. Zhang
    Journal of Materials Engineering and Performance, 2017, 26 : 2179 - 2189
  • [8] EBSD CHARACTERIZATION OF BOBBIN FRICTION STIR WELDING OF AA6082-T6 ALUMINIUM ALLOY
    Tamadon, A.
    Pons, D. J.
    Clucas, D.
    ADVANCES IN MATERIALS SCIENCE, 2020, 20 (04): : 49 - 74
  • [9] Friction stir welding of AA6082-T6 sheets: Numerical analysis and experimental tests
    Buffa, G
    Fratini, L
    MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS 1 AND 2, 2004, 712 : 1224 - 1229
  • [10] Precipitation-Induced Grain Growth Simulation of Friction-Stir-Welded AA6082-T6
    Wu, Q.
    Zhang, Z.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (05) : 2179 - 2189
12345