The effect of the pretreatment print paste contents on colour yield of an ink-jet printed cotton fabric

被引：0
|
作者：
C. W. M. Yuen
S. K. A. Ku
P. S. Choi
C. W. Kan
机构：
[1] The Hong Kong Polytechnic University,Institute of Textiles and Clothing
来源：
Fibers and Polymers | 2004年 / 5卷
关键词：
Ink-jet printing; Pretreatment paste; Sodium alginate; Sodium bicarbonate; Urea and steaming time;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Optimum condition concerning the content of pretreatment print paste and steaming time for ink-jet printing was newly developed through the orthogonal analysis. The cotton fabric treated under the newly developed optimum condition could achieve a high level of colour yield similar to that of the commercially pretreated cotton fabric available in the market for ink-jet printing. The results were discussed thoroughly in this paper.
引用
收藏
页码：117 / 121
页数：4
相关论文
共 50 条
  • [21] Dye fixation process in ink-jet printing of cotton fabric by reactive dye
    Yasukawa, Ryoko
    Higashitani, Hiroki
    Yasunaga, Hidekazu
    Urakawa, Hiroshi
    SEN-I GAKKAISHI, 2008, 64 (05) : AA113 - AA117
  • [22] Ink-jet printed ZnO nanowire field effect transistors
    Noh, Yong-Young
    Cheng, Xiaoyang
    Sirringhaus, Henning
    Sohn, Jung Inn
    Welland, Mark E.
    Kang, Dae Joon
    APPLIED PHYSICS LETTERS, 2007, 91 (04)
  • [23] A two-bath method for digital ink-jet printing of cotton fabric with chitosan
    C. W. M. Yuen
    S. K. A. Ku
    C. W. Kan
    P. S. R. Choi
    Fibers and Polymers, 2007, 8 : 625 - 628
  • [24] A two-bath method for digital ink-jet printing of cotton fabric with chitosan
    Yuen, C. W. M.
    Ku, S. K. A.
    Kan, C. W.
    Choi, P. S. R.
    FIBERS AND POLYMERS, 2007, 8 (06) : 625 - 628
  • [25] Some characteristics of ink jet transfer foils and their influence on the print quality of cotton fabric
    Majnaric, Igor
    Bolanca, Stanislav
    Golubovic, Kristijan
    TEKSTIL, 2010, 59 (10): : 456 - 462
  • [26] Polymerization of Fluoroacrylate and Guar Gum Copolymer as a New Pretreatment Paste for Ink-Jet Printing of Polyester
    Chang, Shiau-Yin Peggy
    Chao, Yu-Chou
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 114 (02) : 705 - 712
  • [27] Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric
    Caiyun Zhao
    Chaoxia Wang
    Kunlin Chen
    Yunjie Yin
    Fibers and Polymers, 2017, 18 : 619 - 624
  • [28] Improvement of Ink-Jet Printing Performances Using β-Cyclodextrin Forming Inclusion Complex on Cotton Fabric
    Zhao, Caiyun
    Wang, Chaoxia
    Chen, Kunlin
    Yin, Yunjie
    FIBERS AND POLYMERS, 2017, 18 (04) : 619 - 624
  • [29] Influence of low-temperature plasma on the ink-jet-printed cotton fabric
    Yuen, C. W. M.
    Kan, C. W.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 104 (05) : 3214 - 3219
  • [30] Influence of low-temperature plasma on the ink-jet-printed cotton fabric
    Yuen, C.W.M.
    Kan, C.W.
    Journal of Applied Polymer Science, 2007, 104 (05): : 3214 - 3219
12345