Recycling of Alumina Power After Plasma Spraying

被引：0
|
作者：
A. V. Stepnov
I. V. Belyaev
V. E. Bazhenov
A. A. Pavlov
A. V. Kireev
机构：
[1] Plasma Spraying Center LLC,
[2] A. G. and N. G. Stoletov Vladimir State University,undefined
[3] National University of Science and Technology MISiS,undefined
[4] Plasma Spraying Technologies LLC,undefined
来源：
Refractories and Industrial Ceramics | 2020年 / 61卷
关键词：
plasma spraying; powder Al; O; waste; magnetic separation; recycling;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The possible reuse of powder Al2O3 waste formed in manufacturing of ceramic refractory products by plasma spraying was studied. The powder alumina waste was found to be individual particles α- and γ-Al2O3 and their conglomerates and also included iron oxides in the form of Fe2O3 and Fe3O4. It was shown that the plasma-spraying powder waste had to be purified of Al2O3 conglomerates and iron oxides in order to reuse it. For this purpose, powder waste should be sifted through a sieve and subjected to magnetic separation. It was established experimentally that such a powder can be reused for applying coatings and fabricating products by plasma spraying without degrading their quality
引用
收藏
页码：196 / 199
页数：3
相关论文
共 50 条
  • [31] Cryogenic cooling in high power plasma spraying
    Dhers, J
    Goubot, N
    David, T
    Baudoin, J
    THERMAL SPRAY 2001: NEW SURFACES FOR A NEW MILLENNIUM, 2001, : 533 - 538
  • [32] Development of high power hybrid plasma spraying
    Hamatani, Hideki
    Ohara, Masahiro
    Fuji, Masao
    Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 1999, 63 (01): : 135 - 143
  • [33] Development of high power hybrid plasma spraying
    Hamatani, H
    Ohara, M
    Fuji, M
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1999, 63 (01) : 135 - 143
  • [34] Alumina coatings by atmospheric DC plasma spraying of aluminium hydroxide powders
    Denoirjean, A
    Grimaud, A
    Fauchais, P
    Thomas, P
    PROGRESS IN PLASMA PROCESSING OF MATERIALS 1997, 1997, : 721 - 733
  • [35] Experimental study of particle deposition characteristics of alumina using plasma spraying
    V. Selvarajan
    P. Saravanan
    M. P. Srivastava
    Journal of Thermal Spray Technology, 2001, 10 : 138 - 141
  • [36] Plasma spraying of stainless-steel particles coated with an alumina shell
    Ageorges, H
    Fauchais, P
    THIN SOLID FILMS, 2000, 370 (1-2) : 213 - 222
  • [37] Alumina grit blasting parameters for surface preparation in the plasma spraying operation
    Univ of Limoges, Limoges, France
    J Therm Spray Technol, 2 (217-227):
  • [38] Alumina reinforced stainless steel coatings by plasma spraying mechanofused particles
    Alvarez, RC
    Ageorges, H
    Fauchais, P
    SURFACE ENGINEERING: COATING AND HEAT TREATMENTS, PROCEEDINGS, 2003, : 544 - 548
  • [39] Glass-alumina functionally graded materials produced by plasma spraying
    Cannillo, V.
    Lusvarghi, L.
    Manfredini, T.
    Montorsi, M.
    Siligardi, C.
    Sola, A.
    LAYERED, FUNCTIONAL GRADIENT CERAMICS, AND THERMAL BARRIER COATINGS: DESIGN, FABRICATION AND APPLICATIONS, 2007, 333 : 227 - +
  • [40] Effect of atmospheric plasma spraying parameters on porosity level of alumina coatings
    Thirumalaikumarasamy, D.
    Shanmugam, K.
    Balasubramanian, V.
    SURFACE ENGINEERING, 2012, 28 (10) : 759 - 766
12345