Application of linear and nonlinear vibration absorbers in micro-milling process in order to suppress regenerative chatter

被引：0
|
作者：
Saleh Shakeri
Farhad S. Samani
机构：
[1] Shahid Bahonar University of Kerman,Department of Mechanical Engineering
[2] Shahid Bahonar University of Kerman,Mechanical Engineering Department
来源：
Nonlinear Dynamics | 2017年 / 89卷
关键词：
Passive dynamic damper; Tuned mass damper; Nonlinear energy sink; Micro-milling;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper, linear and nonlinear vibration absorbers are designed to suppress regenerative chatter in micro-milling process. Suppressing regenerative chatter leads to improve surface finish. Micro-milling process is considered as a two degree of freedom system, and the run-out effects of cutting tool are also taken into account. Linear and nonlinear absorbers in two directions are composed of mass, spring and dashpot elements. The optimum values of the absorber parameters are determined by means of an optimization algorithm in order to minimize the cutting tool vibration. The effectiveness of different types of the absorbers in micro-milling process is illustrated. The optimum parameters for each type of absorbers are presented.
引用
收藏
页码：851 / 862
页数：11
相关论文
共 39 条
  • [21] In-process chatter detection in micro-milling using acoustic emission via machine learning classifiers
    Sestito, Guilherme Serpa
    Venter, Giuliana Sardi
    Barros Ribeiro, Kandice Suane
    Rodrigues, Alessandro Roger
    da Silva, Maira Martins
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (11-12): : 7293 - 7303
  • [22] In-process chatter detection in micro-milling using acoustic emission via machine learning classifiers
    Guilherme Serpa Sestito
    Giuliana Sardi Venter
    Kandice Suane Barros Ribeiro
    Alessandro Roger Rodrigues
    Maíra Martins da Silva
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 7293 - 7303
  • [23] Finite Element Analysis and Experimental Investigation of Tool Chatter in Ultra-Precision Diamond Micro-Milling Process
    Zhang, Haijun
    Lu, Shijin
    Zhang, Chunyu
    Li, Guo
    Teng, Fei
    Zhang, Junjie
    Sun, Tao
    APPLIED SCIENCES-BASEL, 2022, 12 (23):
  • [24] Nonlinear milling of a flexible plate-workpiece with tool wear & process damping: Bifurcation, stability analysis, and chatter suppression via tunable vibration absorbers
    Nasiri, Keivan
    Moradi, Hamed
    THIN-WALLED STRUCTURES, 2025, 210
  • [25] Effects of process parameters on tool vibration and force transmissibility in high-speed micro-milling machine
    Chitransh Singh
    Arnab Das
    Vivek Bajpai
    Madan Lal Chandravanshi
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45
  • [26] Effects of process parameters on tool vibration and force transmissibility in high-speed micro-milling machine
    Singh, Chitransh
    Das, Arnab
    Bajpai, Vivek
    Chandravanshi, Madan Lal
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2023, 45 (06)
  • [27] Bifurcation analysis of nonlinear milling process with tool wear and process damping: Sub-harmonic resonance under regenerative chatter
    Moradi, Hamed
    Vossoughi, Gholamreza
    Movahhedy, Mohammad R.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, 85 : 1 - 19
  • [28] Application of backpropagation neural network for spindle vibration-based tool wear monitoring in micro-milling
    Hsieh, Wan-Hao
    Lu, Ming-Chyuan
    Chiou, Shean-Juinn
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 61 (1-4): : 53 - 61
  • [29] Application of backpropagation neural network for spindle vibration-based tool wear monitoring in micro-milling
    Wan-Hao Hsieh
    Ming-Chyuan Lu
    Shean-Juinn Chiou
    The International Journal of Advanced Manufacturing Technology, 2012, 61 : 53 - 61
  • [30] First-order optimal linear and nonlinear detuning of centrifugal pendulum vibration absorbers
    Mayet, J.
    Ulbrich, H.
    JOURNAL OF SOUND AND VIBRATION, 2015, 335 : 34 - 54
1234