Application of linear and nonlinear vibration absorbers in micro-milling process in order to suppress regenerative chatter

被引：0
|
作者：
Saleh Shakeri
Farhad S. Samani
机构：
[1] Shahid Bahonar University of Kerman,Department of Mechanical Engineering
[2] Shahid Bahonar University of Kerman,Mechanical Engineering Department
来源：
Nonlinear Dynamics | 2017年 / 89卷
关键词：
Passive dynamic damper; Tuned mass damper; Nonlinear energy sink; Micro-milling;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper, linear and nonlinear vibration absorbers are designed to suppress regenerative chatter in micro-milling process. Suppressing regenerative chatter leads to improve surface finish. Micro-milling process is considered as a two degree of freedom system, and the run-out effects of cutting tool are also taken into account. Linear and nonlinear absorbers in two directions are composed of mass, spring and dashpot elements. The optimum values of the absorber parameters are determined by means of an optimization algorithm in order to minimize the cutting tool vibration. The effectiveness of different types of the absorbers in micro-milling process is illustrated. The optimum parameters for each type of absorbers are presented.
引用
收藏
页码：851 / 862
页数：11
相关论文
共 39 条
  • [1] Application of linear and nonlinear vibration absorbers in micro-milling process in order to suppress regenerative chatter
    Shakeri, Saleh
    Samani, Farhad S.
    NONLINEAR DYNAMICS, 2017, 89 (02) : 851 - 862
  • [2] Vibration absorber design to suppress regenerative chatter in nonlinear milling process: Application for machining of cantilever plates
    Moradi, Hamed
    Vossoughi, Gholamreza
    Behzad, Mehdi
    Movahhedy, Mohammad R.
    APPLIED MATHEMATICAL MODELLING, 2015, 39 (02) : 600 - 620
  • [3] A regenerative chatter observer analysis for micro-milling
    Liu, Di
    Liu, Xiaoli
    Pei, Xuming
    Wang, Caidong
    Chen, Lumin
    2019 7TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING, 2020, 758
  • [4] Chatter Stability Model of Micro-Milling With Process Damping
    Jin, Xiaoliang
    Altintas, Yusuf
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2013, 135 (03):
  • [5] Chatter modelling in micro-milling by considering process nonlinearities
    Afazov, S. M.
    Ratchev, S. M.
    Segal, J.
    Popov, A. A.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2012, 56 : 28 - 38
  • [6] Detection and analysis of chatter occurrence in micro-milling process
    Li, Huaizhong
    Jing, Xiubing
    Wang, Jun
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (11) : 1359 - 1371
  • [7] COUNTERMEASURE AGAINST REGENERATIVE CHATTER IN END MILLING OPERATIONS WITH VIBRATION ABSORBERS
    Nakano, Y.
    Takahara, H.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2010, VOL 13, 2012, : 157 - 166
  • [8] THE EFFECT OF MULTIPLE DYNAMIC ABSORBERS ON REGENERATIVE CHATTER AND RESONANCE IN END MILLING PROCESS
    Nakano, Yutaka
    Takahara, Hiroki
    Yasue, Kengo
    Asaga, Ryutaro
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 12, 2013, : 199 - 205
  • [9] Stability improvement and regenerative chatter suppression in nonlinear milling process via tunable vibration absorber
    Moradi, Hamed
    Bakhtiari-Nejad, Firooz
    Movahhedy, Mohammad R.
    Vossoughi, Gholamreza
    JOURNAL OF SOUND AND VIBRATION, 2012, 331 (21) : 4668 - 4690
  • [10] Investigation of the Internal Resonance and Regenerative Chatter Dynamics in Nonlinear Milling Process
    Moradi, Hamed
    Movahhedy, Mohammad R.
    Vossoughi, Gholamreza
    Ahmadian, Mohammad T.
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE 2011, VOL 1, PTS A AND B: 23RD BIENNIAL CONFERENCE ON MECHANICAL VIBRATION AND NOISE, 2012, : 141 - 150
1234