Effect of indium addition on the microstructural formation and soldered interfaces of Sn-2.5Bi-1Zn-0.3Ag lead-free solder

被引：0
|
作者：
Ming-jie Dong
Zhi-ming Gao
Yong-chang Liu
Xun Wang
Li-ming Yu
机构：
[1] Tianjin University,School of Materials Science & Engineering, Tianjin Key Laboratory of Advanced Jointing Technology
来源：
International Journal of Minerals, Metallurgy, and Materials | 2012年 / 19卷
关键词：
soldering alloys; indium; microstructure; interfaces; melting point; intermetallics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The microstructural formation and properties of Sn-2.5Bi−xIn-1Zn-0.3Ag (in wt%) alloys and the evolution of soldered interfaces on a Cu substrate were investigated. Apart from the relatively low melting point (about 195°C), which is close to that of conventional eutectic Sn-Pb solder, the investigated solder presents superior wettability, solderability, and ductility. The refined equiaxial grains enhance the mechanical properties, and the embedded bulk intermetallic compounds (IMCs) (Cu6Sn5 and Cu5Zn8) and granular Bi particles improve the joint reliability. The addition of In reduces the solubility of Zn in the β-Sn matrix and strongly influences the separation and growth behaviors of the IMCs. The soldered interface of Sn-2.5Bi-xIn-1Zn-0.3Ag/Cu consists of Cu-Zn and Cu-Sn IMC layers.
引用
收藏
页码：1029 / 1035
页数：6
相关论文
共 50 条
  • [31] Effects of Ag on Properties of Sn-9Zn Lead-Free Solder
    Chen Wenxue
    Xue Songbai
    Wang Hui
    Hu Yuhua
    RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (10) : 1702 - 1705
  • [32] On the advantages of Bi addition into Sn-Cu-S lead-free solder
    Huang, Huizhen
    Zhang, Qinghuan
    Shuai, Gewang
    Yu, Xinyuan
    Tian, Tingfang
    MATERIALS SCIENCE AND TECHNOLOGY, 2021, 37 (18) : 1435 - 1444
  • [33] Thermodynamic optimization of the lead-free solder system Bi-In-Sn-Zn
    Moelans, N
    Kumar, KCH
    Wollants, P
    JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 360 (1-2) : 98 - 106
  • [34] Effect of the soldering time on the formation of interfacial structure between Sn–Ag–Zn lead-free solder and Cu substrate
    Jing Bo Wan
    Yong Chang Liu
    Chen Wei
    Peng Jiang
    Zhi Ming Gao
    Journal of Materials Science: Materials in Electronics, 2008, 19 : 1160 - 1168
  • [35] The effect of Ag content on the formation of Ag3Sn plates in Sn-Ag-Cu lead-free solder
    Huann-Wu Chiang
    Kenndy Chang
    Jun-Yuan Chen
    Journal of Electronic Materials, 2006, 35 : 2074 - 2080
  • [36] The effect of Ag content on the formation of Ag3Sn plates in Sn-Ag-Cu lead-free solder
    Chiang, Huann-Wu
    Chang, Kenndy
    Chen, Jun-Yuan
    JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (12) : 2074 - 2080
  • [37] Effect of Cooling Rate on Ag3Sn Formation in Sn-Ag Based Lead-Free Solder
    Lee, Hwa-Teng
    Chen, Yin-Fa
    Hong, Ting-Fu
    Shih, Ku-Ta
    2009 11TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC 2009), 2009, : 875 - 878
  • [38] Influence of Bi addition on joint strength between electrode and Sn-3Ag lead-free solder
    Hwang, CW
    Suganuma, K
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 1107 - 1110
  • [39] Wettability of Sn-9Zn-xAg lead-free solder and mechanical properties of soldered joints
    Chen, Wenxue
    Xue, Songbai
    Wang, Hui
    Wang, Jianxin
    Hanjie Xuebao/Transactions of the China Welding Institution, 2009, 30 (06): : 75 - 78
  • [40] Strength of solder joints with lead-free Sn-Ag and Sn-Bi alloys
    Kikuchi, S
    Nishimura, M
    Nakajima, I
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 1047 - 1050
12345