Development of a Cohesive Zone Model for Fatigue Crack Growth

被引：0
|
作者：
Yeong-Hun Choi
Hyun-Gyu Kim
机构：
[1] Seoul National University of Science and Technology,Department of Mechanical and Automotive Engineering
来源：
Multiscale Science and Engineering | 2020年 / 2卷 / 1期
关键词：
Fatigue crack growth; Cohesive zone models; PPR model; Fatigue damage;
D O I：
10.1007/s42493-020-00034-5
中图分类号：
学科分类号：
摘要：
In this study, fatigue damage is combined with a cohesive zone model to simulate fatigue crack growth along the interface between dissimilar materials under repeated loadings. An evolution equation for fatigue damage is considered for the degradation of materials in a failure process zone. The potential-based Park–Paulino–Roesler cohesive model is employed to correctly consider mixed modes in the relationships between cohesive tractions and crack opening separations. Numerical examples show that the present method can predict properly fatigue crack growth along the interface between dissimilar materials under repeated loadings.
引用
收藏
页码：42 / 53
页数：11
相关论文
共 50 条
  • [41] On damage accumulations in the cyclic cohesive zone model for XFEM analysis of mixed-mode fatigue crack growth
    Xu, Yangjian
    Yuan, Huang
    COMPUTATIONAL MATERIALS SCIENCE, 2009, 46 (03) : 579 - 585
  • [42] Stress-state dependent cohesive model for fatigue crack growth
    Kumar, R. Shravan
    Nijin, I. S.
    Bharadwaj, M. Vivek
    Rajkumar, G.
    Banerjee, Anuradha
    FRATTURA ED INTEGRITA STRUTTURALE, 2016, 10 (38): : 19 - 25
  • [43] A cohesive zone model for thermomechanical fatigue
    Abraham, Jeffy
    Roth, Stephan
    Kuna, Meinhard
    INTERNATIONAL JOURNAL OF FATIGUE, 2020, 136
  • [44] A refined cohesive zone model that accounts for inertia of cohesive zone of a moving crack
    Wu, J.
    Ru, C. Q.
    MECHANICS RESEARCH COMMUNICATIONS, 2016, 76 : 78 - 85
  • [45] Prediction of fretting fatigue crack initiation location and direction using cohesive zone model
    Pereira, K.
    Bhatti, N.
    Wahab, M. Abdel
    TRIBOLOGY INTERNATIONAL, 2018, 127 : 245 - 254
  • [46] Influence of hydrogen coverage on the parameters of a cohesive zone model dedicated to fatigue crack propagation
    Moriconi, C.
    Henaff, G.
    Halm, D.
    11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
  • [47] Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High ΔK Levels of Inconel 718
    Li, Huan
    Li, Jinshan
    Yuan, Huang
    INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING, 2018, 2018
  • [48] Numerical study on high-cycle fatigue crack growth of sinusoidal interface based on cyclic cohesive zone model
    Chen, Zhiying
    Dai, Yanwei
    Liu, Yinghua
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 174
  • [49] A cohesive zone model and interfacial crack problems
    Kishimoto, K
    Omiya, M
    IUTAM SYMPOSIUM ON MESOSCOPIC DYNAMICS OF FRACTURE PROCESS AND MATERIALS STRENGTH, 2004, 115 : 301 - 310
  • [50] Characterizing Non-linear Fatigue Crack Growth and Size Effect in Plain Concrete Beams with a Hybrid Effective Crack and Cohesive Zone Model
    Brake, Nicholas Andres
    Chatti, Karim
    8TH RILEM INTERNATIONAL CONFERENCE ON MECHANISMS OF CRACKING AND DEBONDING IN PAVEMENTS, 2016, 13 : 185 - 192
12345