Verification of relap5/mod3.2 critical heat transfer computational method by experiments performed on the ks facility

被引：0
|
作者：
D. A. Afremov
D. A. Yashnikov
机构：
[1] Dollezhal Research and Development Institute of Power Engineering (NIKIET),
来源：
Atomic Energy | 2011年 / 110卷
关键词：
Heat Flux; Critical Heat Flux; Mixed Packing; Thermohydraulic Calculation; Fuel Assembly Model;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The computational results obtained with the RELAP5/mod3.2 code for critical heat transfer are compared with experimental data obtained on the KS facility for RBMK fuel assembly models. The confidence interval is constructed for the correction factor to the computed critical heat flux.
引用
收藏
页码：328 / 331
页数：3
相关论文
共 50 条
  • [31] 基于修改后RELAP5/MOD3.2的氟盐高温堆实验回路分析
    许荣栓
    刘利民
    王宁
    张大林
    王成龙
    秋穗正
    苏光辉
    原子能科学技术, 2017, 51 (05) : 828 - 835
  • [32] RELAP5/MOD3.2 sensitivity calculations of loss-of-feed water (LOFW) transient at Unit 6 of Kozloduy NPP
    Pavlova, MP
    Groudev, PP
    Stefanova, AE
    Gencheva, RV
    NUCLEAR ENGINEERING AND DESIGN, 2006, 236 (03) : 322 - 331
  • [33] Condensation experiment in the presence of noncondensables in a vertical tube of a passive containment cooling system and its assessment with RELAP5/MOD3.2
    Park, Hyun Sik
    No, Hee Cheon
    Nuclear Technology, 127 (02): : 160 - 169
  • [34] 三维瞬态物理分析模型与RELAP5/mod3.2程序的耦合研究
    陈玉清
    蔡琦
    于雷
    核动力工程, 2010, 31 (03) : 9 - 13
  • [35] A condensation experiment in the presence of noncondensables in a vertical tube of a passive containment cooling system and its assessment with RELAP5/MOD3.2
    Park, HS
    No, HC
    NUCLEAR TECHNOLOGY, 1999, 127 (02) : 160 - 169
  • [36] Simulation of a control rod ejection accident in a VVER-1000/V446 using RELAP5/Mod3.2
    Tabadar, Z.
    Hadad, K.
    Nematollahi, M. R.
    Jabbari, M.
    Khaleghi, M.
    Hashemi-Tilehnoee, M.
    ANNALS OF NUCLEAR ENERGY, 2012, 45 : 106 - 114
  • [37] RELAP5 MOD3.2 modification and application to the transient analysis of a fluoride-salt-cooled high-temperature reactor
    Liu, Limin
    Zhang, Dalin
    Yan, Qiqi
    Xu, Rongshuan
    Wang, Chenglong
    Qiu, Suizheng
    Su, G. H.
    ANNALS OF NUCLEAR ENERGY, 2017, 101 : 504 - 515
  • [38] Multi-objective optimal design for the coolant system of a pressurized power reactor and its validation by the RELAP5/MOD3.2 code
    Chen, Lei
    Yan, Changqi
    Wang, Jianjun
    PROGRESS IN NUCLEAR ENERGY, 2014, 71 : 216 - 224
  • [39] Relap5/mod3.2 investigation of main loop isolating valves in case of SGTR in VVER440/V230
    Groudev, PP
    Gencheva, RV
    ANNALS OF NUCLEAR ENERGY, 2004, 31 (14) : 1583 - 1613
  • [40] Using an IIST 1% cold-leg SBLOCA experiment with passive safety injection to assess the RELAP5/MOD3.2 code
    Lee, CH
    Huang, IM
    Chang, CJ
    NUCLEAR TECHNOLOGY, 2001, 135 (02) : 109 - 122
12345