Modeling of laser keyhole welding: Part II. simulation of keyhole evolution, velocity, temperature profile, and experimental verification

被引：0
|
作者：
Hyungson Ki
Jyoti Mazumder
Pravansu S. Mohanty
机构：
[1] University of Michigan,the Center for Laser Aided Intelligent Manufacturing, Mechanical Engineering Department
[2] University of Michigan-Dearborn,the Mechanical Engineering Department
来源：
Metallurgical and Materials Transactions A | 2002年 / 33卷
关键词：
Welding; Material Transaction; Laser Power; Weld Pool; Scanning Speed;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This article presents the simulation results of a three-dimensional mathematical model using the level set method for laser-keyhole welding. The details of the model are presented in Part I.[4] The effects of keyhole formation on the liquid melt pool and, in turn, on the weld bead are investigated in detail. The influence of process parameters, such as laser power and scanning speed is analyzed. This simulation shows very interesting features in the weld pool, such as intrinsic instability of keyholes, role of recoil pressure, and effect of beam scanning.
引用
收藏
页码：1831 / 1842
页数：11
相关论文
共 35 条
  • [21] Simulation and experimental studies of keyhole induced porosity in laser-MIG hybrid fillet welding of aluminum alloy in the horizontal position
    Xu, Guoxiang
    Li, Lin
    Wang, Houxiao
    Li, Pengfei
    Guo, Qinghu
    Hu, Qingxian
    Du, Baoshuai
    OPTICS AND LASER TECHNOLOGY, 2019, 119
  • [22] Mathematical model to study the keyhole formation in pulsed Nd:YAG laser welding of SS 316L material and its experimental verification
    Bhardwaj, Vijay
    Upadhyaya, B. N.
    Bindra, K. S.
    JOURNAL OF LASER APPLICATIONS, 2022, 34 (03)
  • [23] Experimental study on the keyhole dynamic evolution and porosity formation during laser welding of Ti-6Al-4V alloy
    Tao, Donglin
    Gao, Yanfeng
    Pan, Hao
    Zeng, Lixue
    Zhang, Zhao
    APPLIED OPTICS, 2024, 63 (21) : 5633 - 5641
  • [24] Numerical and experimental evaluation of temperature field and melt flow in keyhole laser welding of dissimilar duplex stainless steel and nickel base alloy
    Li, Xuefeng
    Elsiddieg, Awatif M. A.
    Alqahtani, Aisha M.
    Ben Ammar, Mohamed
    Alzahrani, Ali
    Hussien, Mohamed
    Mahamad, Saipunidzam
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2025, 214
  • [25] Numerical simulation of molten pool flow behavior and keyhole evolution behavior in dual-laser beam oscillating bilateral synchronous welding of T-joints
    Xia, Peiyun
    Wang, Chunming
    Mi, Gaoyang
    Zhang, Mingyang
    Xiong, Lingda
    Zhang, Xiong
    Zhai, Chuncheng
    Feng, Xiaosong
    Hu, Yiyang
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2023, 209
  • [26] Interface development and numerical simulation of powder co-injection moulding. Part II. Numerical simulation and experimental verification
    Lou, Jia
    Li, Yimin
    He, Hao
    Li, Dongyang
    Wang, Guangyao
    Feng, Juan
    Liu, Chen
    POWDER TECHNOLOGY, 2017, 305 : 357 - 363
  • [27] Thermal behavior and microstructure evolution during laser deposition with laser-engineered net shaping: Part II. Experimental investigation and discussion
    Zheng, B.
    Zhou, Y.
    Smugeresky, J. E.
    Schoenung, J. M.
    Lavernia, E. J.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (09): : 2237 - 2245
  • [28] Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion
    B. Zheng
    Y. Zhou
    J.E. Smugeresky
    J.M. Schoenung
    E.J. Lavernia
    Metallurgical and Materials Transactions A, 2008, 39 : 2237 - 2245
  • [29] Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling
    S. M. Kelly
    S. L. Kampe
    Metallurgical and Materials Transactions A, 2004, 35 : 1869 - 1879
  • [30] Microstructural evolution in laser-deposited multilayer Ti-6AI-4V builds: Part II. Thermal modeling
    Kelly, SM
    Kampe, SL
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (06): : 1869 - 1879
1234