French round-robin test of X-ray stress determination on a shot-peened steel

被引：0
|
作者：
M. François
F. Convert
S. Branchu
机构：
[1] LAMM/CRTT,LAMM/CRTT
[2] Bd de l'Université,undefined
[3] CETIM,undefined
[4] Bd de l'Université,undefined
来源：
Experimental Mechanics | 2000年 / 40卷
关键词：
Residual stresses; X-ray analysis; uncertainty analysis; interlaboratory measurements;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A round-robin test of X-ray residual stress determination was performed by the Groupement Français d'Analyse des Contraintes and involved 16 laboratories. The standard deviation of the measurements was about 36 MPa, but a posttreatment of the raw data with the same soft-ware reduced the dispersion to 19 MPa. Analysis of the uncertainty sources (goniometer alignment, operator, counting statistics, nonlinearity of the material, etc.) revealed that the main sources come from the data treatment and the operator.
引用
收藏
页码：361 / 368
页数：7
相关论文
共 50 条
  • [41] On the residual stress modeling of shot-peened AISI 4340 steel: finite element and response surface methods
    Asgari, Ali
    Dehestani, Pouya
    Poruraminaie, Iman
    MECHANICS & INDUSTRY, 2018, 18 (06)
  • [42] Evolution of residual stress redistribution associated with localized surface microcracking in shot-peened medium-carbon steel during fatigue test
    Kim, Jong-Cheon
    Cheong, Seong-Kyun
    Noguchi, Hiroshi
    INTERNATIONAL JOURNAL OF FATIGUE, 2013, 55 : 147 - 157
  • [43] Influence of tempering conditions on shot-peened tool steel components in-depth residual stress profiles
    Cecchin, D.
    Kobza, E.
    Cazzolli, M.
    Ricardo, C. L. Azanza
    D'Incau, M.
    Bandini, M.
    Scardi, P.
    RESIDUAL STRESSES IX, 2014, 996 : 769 - +
  • [44] Surface mechanical property and residual stress stability of shot-peened Mg-8Gd-3Y alloy by in-situ X-ray diffraction
    Liu, Huabing
    Yang, Bo
    Zhang, Jinhan
    Gan, Jin
    Wu, Weiguo
    Wang, Chengxi
    Jiang, Chuanhai
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 3015 - 3024
  • [45] X-RAY-DIFFRACTION STUDY OF THE FATIGUE BEHAVIOR OF A SHOT-PEENED ALUMINUM-LITHIUM ALLOY
    REYNIER, B
    CHAPPUIS, G
    SPRAUEL, JM
    EXPERIMENTAL MECHANICS, 1995, 35 (02) : 112 - 118
  • [46] Standardized X-ray tomography testing of additively manufactured parts: A round robin test
    du Plessis, Anton
    le Roux, Stephan G.
    ADDITIVE MANUFACTURING, 2018, 24 : 125 - 136
  • [47] Density Determination of Sintered Steel - Results of a Round Robin Test
    Peters, R.
    Beiss, P.
    Lindlohr, S.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2019, 56 (11): : 731 - 746
  • [48] A ROUND-ROBIN TEST FOR THE TOTAL CYANIDE DETERMINATION OF COMPLICATED WASTE-WATER SAMPLES
    YAMADA, E
    NAGAOKA, K
    TAKEUCHI, T
    IKATSU, H
    NAKAGAWA, C
    TANAKA, M
    FUJIWARA, I
    HARA, Y
    KOJIMA, H
    SAKAMOTO, H
    GOTO, M
    KORENAGA, T
    BUNSEKI KAGAKU, 1992, 41 (07) : T103 - T108
  • [49] SOUND POWER DETERMINATION FROM SOUND INTENSITY - RESULTS OF THE ANSI ROUND-ROBIN TEST
    SHIRAHATTI, US
    CROCKER, MJ
    PEPPIN, RJ
    ENGINEERING FOR ENVIRONMENTAL NOISE CONTROL, VOLS 1 AND 2: INTER-NOISE 89, 1989, : 1029 - 1034
  • [50] Conductivity profile determination by eddy current for shot-peened superalloy surfaces toward residual stress assessment
    Shen, Y.
    Lee, C.
    Lo, C. C. H.
    Nakagawa, N.
    Frishman, A. M.
    JOURNAL OF APPLIED PHYSICS, 2007, 101 (01)
12345