Novel plasticizer for acrylonitrile butadiene rubber (NBR) and its effect on physico-mechanical and electrical properties of the vulcanizates

被引:0
|
作者
EMAD S SHAFIK
NEHAD N ROZIK
ADEL F YOUNAN
SALWA L ABD EL-MESSIEH
机构
[1] National Research Centre,Polymer and Pigments Department
[2] National Research Centre,Microwave Physics and Dielectric Department
来源
关键词
Quaternization method; anion exchange; ionic liquid; plasticizer; mechanical properties; electrical properties;
D O I
暂无
中图分类号
学科分类号
摘要
In the manuscript, the quaternization method followed by anion exchange reaction was used to prepare 1-dodecyl-3-methylimidazolium tetrafluoroborate [C12MIM]BF4− ionic liquid (IL). The prepared IL was verified through Fourier transform infrared and 1H-nuclear magnetic resonance spectroscopy. The IL, as a novel plasticizer, is incorporated into the acrylonitrile butadiene rubber (NBR) composite with different contents from 1 to 5 phr in comparison with dioctyl phthalate (DOP) as a traditional plasticizer. The IL effect on the rheology, mechanical, electrical properties of the vulcanizates and their resistance to thermal ageing were investigated. The morphology of NBR composites was investigated by a scanning electron microscope. The results show that adding IL to the NBR vulcanizates improves both mechanical and electrical properties of composites more than traditional DOP.
引用
收藏
相关论文
共 50 条
  • [41] Mechanical and electrical properties of acrylonitrile-butadiene rubber filled with treated nanographite
    El-Nashar, Doaa Essamey
    Rozik, Nehad Naem
    Abd El-Messieh, Salwa Louis
    POLIMERY, 2014, 59 (11-12) : 834 - 844
  • [42] Effect of molybdenum disulphide and graphite on tribological properties of vulcanizates of hydrogenated butadiene-acrylonitrile rubber
    Ostaszewska, Urszula
    Magryta, Jacek
    Lewandowski, Michal
    CHEMIK, 2010, 64 (04): : 261 - 267
  • [43] STRUCTURE AND PHYSICO-MECHANICAL BEHAVIOR OF BLENDS OF POLYVINYLCHLORIDE WITH BUTADIENE-ACRYLONITRILE ELASTOMER
    OGANESOV, YG
    KULEZNEV, VN
    VOYUTSKI.SS
    VYSOKOMOLEKULYARNYE SOEDINENIYA SECTION B, 1970, 12 (09): : 691 - &
  • [44] Mechanical properties and microstructure of acrylonitrile-butadiene rubber vulcanizates reinforced by in situ polymerized phenolic resin
    Ye, Linzhong
    Zhang, Yongheng
    Wang, Zhaobo
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 105 (06) : 3853 - 3857
  • [45] Comparison on Properties of Acrylonitrile Styrene Butadiene Rubber (NSBR) and Styrene Butadiene Rubber (SBR)/Nitrile Rubber (NBR) Blends
    Chokanandsombat, Yotwadee
    Owjinda, Supanut
    Sirisinha, Chakrit
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2012, 65 (11-12): : 41 - 46
  • [46] Study of rheological, physico-mechanical and morphological Properties of Nitrile Butadiene Rubber loaded with Organo Bentonite
    Mahmoud, Doaa S.
    Ahmed, Nivin M.
    El-Sabbagh, Salwa H.
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2018, 71 (1-2): : 47 - 53
  • [47] Effect of liquid isoprene rubber on dynamic mechanical properties of emulsionpolymerized styrene/butadiene rubber vulcanizates
    Li, Zhiguo
    Ren, Wentan
    Chen, Hong
    Ye, Liqing
    Zhang, Yong
    POLYMER INTERNATIONAL, 2012, 61 (04) : 531 - 538
  • [48] Mechanical and morphological properties of acrylonitrile-butadiene-styrene terpolymer/nitrile butadiene rubber thermoplastic vulcanizates plasticized by dioctyl phthalate
    Wei, Dongya
    Zhao, Jing
    Liu, Tong
    Wang, Zhaobo
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2016, 29 (03) : 366 - 380
  • [49] Effect of Bagasse on the Physico-mechanical Properties of Natural and Styrene-Butadiene Rubbers
    Abdelwahab, N. A.
    Helaly, F. M.
    Badran, A. S.
    JOURNAL OF ELASTOMERS AND PLASTICS, 2008, 40 (04): : 347 - 363
  • [50] Morphology and physico-mechanical properties of closed cell microcellular EPDM rubber vulcanizates: Effect of conductive carbon black and blowing agent
    Mahapatra, SP
    Tripathy, DK
    CELLULAR POLYMERS, 2004, 23 (03) : 127 - 144