A large percentage of the damages to reinforced concrete structures is caused by corrosion of the reinforcement steel, which often leads to expensive repairs or new construction of existing structures. Due to their high strength and resistance to corrosion, reinforcements made of carbon fibre-reinforced polymers (CFRP) are becoming more and more important in structural engineering. It is expected, that the service life of CFRP reinforced concrete (RC) members can be significantly increased as the strength-reduction due to corrosion is negligible compared to conventional RC members. Therefore, precise knowledge of the long-term behaviour of CFRP RC members is required in order to ensure safe and economic design. This paper presents experimental investigations on the long-term behaviour of CFRP RC members as well as steel-reinforced RC members under monotonic and cyclic long-term loading with varying load levels, different cross-sectional shapes and shear slendernesses. Accompanying experiments on the concrete creep behaviour that were conducted within the investigations are shown. Within the scope of the experiments, the deflections as well as the strains on the top and bottom side of the RC members were measured using displacement sensors and strain gauges. The experimental data is evaluated, especially with regard to the time-dependent deflections. The data is compared to existing mechanical and empirical models, which are usually derived for steel-reinforced RC members. Based on the experimental data, the time-dependent reduction of stiffness and conclusions for the calculation of deflections are shown.
机构:
Zhejiang Ind Polytech Coll, Sch Architecture & Engn, Shaoxing, Peoples R ChinaZhejiang Ind Polytech Coll, Sch Architecture & Engn, Shaoxing, Peoples R China
Gao, Ang
Zhang, Mengxi
论文数: 0引用数: 0
h-index: 0
机构:
Shanghai Univ, Dept Civil Engn, Shanghai, Peoples R ChinaZhejiang Ind Polytech Coll, Sch Architecture & Engn, Shaoxing, Peoples R China
机构:
Nanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, ChinaNanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, China
Ding Dajun
Jin Zhisheng
论文数: 0引用数: 0
h-index: 0
机构:
Nanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, ChinaNanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, China
Jin Zhisheng
Huang Defu
论文数: 0引用数: 0
h-index: 0
机构:
Nanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, ChinaNanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, China
Huang Defu
Lan Zongjian
论文数: 0引用数: 0
h-index: 0
机构:
Nanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, ChinaNanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, China
Lan Zongjian
Pong Tonghe
论文数: 0引用数: 0
h-index: 0
机构:
Nanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, ChinaNanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, China
Pong Tonghe
Liu Jiang
论文数: 0引用数: 0
h-index: 0
机构:
Nanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, ChinaNanjing Inst of Technology, Nanjin, China, Nanjing Inst of Technology, Nanjin, China