Compressive Residual Stress into Titanium Alloy Using Cavitation Shotless Peening Method

被引：0
|
作者：
Hitoshi Soyama
Dan O. Macodiyo
Shankar Mall
机构：
来源：
Tribology Letters | 2004年 / 17卷
关键词：
residual stress; surface modification; cavitation; shot peening; titanium; roughness;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Cavitation shotless peening (CSP) method, where impacts are generated by a submerged cavitating jet (without shots), was used to introduce compressive residual stress in titanium alloy, Ti-6Al-4V for the purpose of enhancing the conventional fatigue and fretting fatigue life and strength. This method provided higher compressive stress at surface as well as up to a depth of 40 μm from the surface than that with the shot peening method. Further, the surface treated by CSP was considerably less rough compared to that by the shot peening method, which is a highly desirable feature to improve the fretting fatigue performance.
引用
收藏
页码：501 / 504
页数：3
相关论文
共 50 条
  • [21] Mechanism of creation of compressive residual stress by shot peening
    Kobayashi, Motokazu
    Matsui, Toshiharu
    Murakami, Yukitaka
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1997, 63 (610): : 1226 - 1230
  • [22] NUMERICAL SIMULATION OF CONTROLLING IN TITANIUM ALLOY SHEETS WELDING RESIDUAL STRESS BY TRAILING PEENING
    X.S.Liu
    H.Y.Fang
    W.L.Xu
    Z.B.Dong
    D.Y.Yu
    Acta Metallurgica Sinica(English Letters), 2004, (03) : 311 - 316
  • [23] Residual Stress Analysis on Titanium Alloy TC4 by Laser Shock Peening
    Li, Jun Hong
    Sun, Shuo
    Hu, Rui
    Wang, Wei
    Liu, Yuntao
    Chen, Dongfeng
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON STRUCTURAL, MECHANICAL AND MATERIAL ENGINEERING (ICSMME 2015), 2016, 19 : 49 - 51
  • [24] Effect of the conventional shot peening and multiple shot peening on microstructure and residual stress of TC17 titanium alloy
    Yu, Wenliang
    Xing, Shilong
    Zhu, Wenlong
    Yin, Ang
    Li, Wenbo
    Jiang, Chuanhai
    Ji, Vincent
    SURFACE & COATINGS TECHNOLOGY, 2024, 493
  • [25] Combined finite element method and dislocation density method solution to residual stress induced by water cavitation peening
    Han, B.
    Ju, D. Y.
    Yu, X. G.
    MATERIALS & DESIGN, 2010, 31 (07) : 3317 - 3323
  • [26] Residual stress in a quenched gear shaft treated by water cavitation peening
    Tsuda, H
    Ju, DY
    Uchiyama, T
    Sunayama, Y
    Oba, R
    RESIDUAL STRESSES VII, PROCEEDINGS, 2005, 490-491 : 364 - 369
  • [27] A study on stress, reflection and double shot peening to increase compressive residual stress
    Ishigami, H
    Matsui, K
    Jin, Y
    Ando, K
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2000, 23 (11) : 959 - 963
  • [28] Machine learning in prediction of residual stress in laser shock peening for maximizing residual compressive stress formation
    Zhou, Yuanhang
    Song, Peilong
    Su, Wei
    Wei, Pengyu
    Zhang, Ruonan
    Guo, Xin
    Ding, Zhipeng
    Yao, Hongbing
    MATERIALS & DESIGN, 2024, 243
  • [29] Sustainability of compressive residual stress on the processing time of water jet peening using ultrasonic power
    Ijiri, Masataka
    Yoshimura, Toshihiko
    HELIYON, 2018, 4 (08):
  • [30] Overcoming detrimental residual stress in titanium by the shot peening process
    Meister, TJ
    SURFACE PERFORMANCE OF TITANIUM, 1996, : 253 - 263
12345