Modeling and experimental validation of the surface residual stresses induced by hard machining of AISI H13 tool steel

被引：0

作者：

S. Caruso

J. C. Outeiro

D. Umbrello

R. M’Saoubi

机构：

[1] University of Calabria,Department of Mechanical Engineering

[2] Faculty of Engineering,CEMDRX, Department of Physics, FCTUC

[3] Portuguese Catholic University,undefined

[4] University of Coimbra,undefined

[5] Seco Tools AB,undefined

来源：

International Journal of Material Forming | 2010年 / 3卷

关键词：

Hard Machining; Material Behaviour; Finite Element Analysis;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Residual stresses induced by orthogonal cutting of AISI H13 tool steel were modeled and simulated using Finite Element (FE) method. A two-dimensional model using elastic-plastic material behavior, shear friction model and a physical chip separation criterion for chip formation were developed. To validate this model the predicted surface residual stresses were compared with those experimentally obtained using X-ray diffraction technique. Finally, the proposed FE model was applied to investigate the influence of flank tool wear and cutting regime parameters on surface residual stresses distribution in the machined surface of AISI H13 tool steel.

引用

页码：515 / 518

页数：3

共 50 条

[41] Influence of pretreatment on surface behavior of duplex plasma treated AISI H13 tool steel
Das, Kalyan
Alphonsa, J.
Ghosh, Manojit
Ghanshyam, J.
Rane, Ramakrishna
Mukherjee, S.
SURFACES AND INTERFACES, 2017, 8 : 206 - 213
[42] Laser remelting of AISI H13 tool steel: influence of cooling rate on the surface properties
Xie, Jichang
Raoelison, Rija Nirina
Di, Ruifeng
Liu, Yanan
Li, Jishuai
Rachik, Mohamed
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2022, 10 (04)
[43] THE EFFECT OF SCAN SPEED ON ENGRAVING DEPTH AND SURFACE ROUGHNESS OF AISI H13 TOOL STEEL
Kasman, S.
Saklakoglu, I. E.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1258 - +
[44] Investigation of wear and surface quality of raw AISI H13 hot work tool steel in electro-discharge machining machine
Nas, Engin
Zurnaci, Erman
Gueltekin, Sidika Yildirim
IRONMAKING & STEELMAKING, 2025,
[45] Surface Behavior of AISI H13 Alloy Steel Machining under Environmentally Friendly Cryogenic MQL with PVD-Coated Tool
Manimaran, G.
Ross, K. Nimel Sworna
JOURNAL OF TESTING AND EVALUATION, 2020, 48 (04) : 3269 - 3280
[46] Optimization of Surface Roughness and Cutting Force in MQL Hard-Milling of AISI H13 Steel
The-Vinh Do
Nguyen-Anh-Vu Le
ADVANCES IN ENGINEERING RESEARCH AND APPLICATION, 2019, 63 : 448 - 454
[47] Numerical simulation of finish hard turning for AISI H13 die steel
Yan, H
Hua, J
Shivpuri, R
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2005, 6 (05) : 540 - 547
[48] Machinability of extruded H13 tool steel: Effect of cutting parameters on cutting forces, surface roughness, microstructure, and residual stresses
Kolomy, Stepan
Maly, Martin
Sedlak, Josef
Zouhar, Jan
Slany, Martin
Hrabec, Pavel
Kouril, Karel
ALEXANDRIA ENGINEERING JOURNAL, 2024, 99 : 394 - 407
[49] Deep cryogenic treatment of carbide tool and its cutting performances in hard milling of AISI H13 steel
Li, Binxun
Zhang, Tao
Zhang, Song
4TH CIRP CONFERENCE ON SURFACE INTEGRITY (CSI 2018), 2018, 71 : 35 - 40
[50] Experimental Investigation and Optimizing Geometrical Characteristics and Surface Quality in Drilling of AISI H13 Steel
Jafarian, Farshid
Samarikhalaj, Hojjat
JOURNAL OF APPLIED AND COMPUTATIONAL MECHANICS, 2020, 6 (02): : 332 - 343

← 1 2 3 4 5 →