Prediction of the deformation behavior of a selective laser-melted Ti-6Al-4V alloy as a function of process parameters

被引：0
|
作者：
Mostafa Mahdavi
Elham Mirkoohi
Eric Hoar
Steven Liang
Hamid Garmestani
机构：
[1] Georgia Institute of Technology,School of Materials Science and Engineering
[2] Georgia Institute of Technology,Woodruff School of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2020年 / 107卷
关键词：
Ti-6Al-4V; Selective laser method; Additive manufacturing; Deformation behavior;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Recent studies have shown that the mechanical properties of Ti alloys produced by additive manufacturing (AM) methods are sensitive to AM process parameters. The mechanical threshold stress (MTS) model is capable of predicting the flow stress behavior of materials; however, the parameters needed in the MTS model are affected by the microstructure that originates from the AM process parameters. To find a relationship between the AM process parameters and the MTS parameters, the effect of process parameters on the mechanical properties of selective laser-melted (SLM) Ti-6Al-4V samples was studied. As the MTS model is sensitive to the microstructure, only near fully dense samples were considered.
引用
收藏
页码：4069 / 4076
页数：7
相关论文
共 50 条
  • [31] Refinement of α′ Martensite by Oxygen in Selective Laser Melted Ti-6Al-4V
    Nurly, Hasfi F.
    Zhang, Jinhu
    Ren, Dechun
    Cai, Yusheng
    Ji, Haibin
    Xu, Dongsheng
    Dong, Zhicheng
    Wang, Hao
    Hu, Qingmiao
    Lei, Jiafeng
    Yang, Rui
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2024, 37 (05) : 777 - 792
  • [32] Fatigue performance evaluation of selective laser melted Ti-6Al-4V
    Edwards, P.
    Ramulu, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 598 : 327 - 337
  • [33] Effect of crystallographic orientation on mechanical anisotropy of selective laser melted Ti-6Al-4V alloy
    Yang, Jingjing
    Yu, Hanchen
    Wang, Zemin
    Zeng, Xiaoyan
    MATERIALS CHARACTERIZATION, 2017, 127 : 137 - 145
  • [34] Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
    Dai, Nianwei
    Zhang, Junxi
    Chen, Yang
    Zhang, Lai-Chang
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2017, 164 (07) : C428 - C434
  • [35] Chip formation characteristics of selective laser melted Ti-6Al-4V
    Shunmugavel, Manikandakumar
    Goldberg, Moshe
    Polishetty, Ashwin
    Nomani, Junior
    Sun, Shoujin
    Littlefair, Guy
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2019, 17 (02) : 109 - 126
  • [36] High cycle fatigue in selective laser melted Ti-6Al-4V
    Kumar, Punit
    Ramamurty, Upadrasta
    ACTA MATERIALIA, 2020, 194 : 305 - 320
  • [37] Dynamic mechanical properties and constitutive relationship of selective laser melted Ti-6Al-4V alloy
    Zhu L.
    Liu Y.
    Meng J.
    Li Z.
    Hu J.
    Li G.
    Wang Y.
    Baozha Yu Chongji/Explosion and Shock Waves, 2022, 42 (09):
  • [38] Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
    Dai, Nianwei
    Zhang, Lai-Chang
    Zhang, Junxi
    Zhang, Xin
    Ni, Qingzhao
    Chen, Yang
    Wu, Maoliang
    Yang, Chao
    CORROSION SCIENCE, 2016, 111 : 703 - 710
  • [39] Fracture mechanical investigations on selective laser melted Ti-6Al-4V
    Brueggemann, J. -P.
    Risse, L.
    Kullmer, G.
    Schramm, B.
    Richard, H. A.
    ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 : 317 - 321
  • [40] Comparative Study on Hot Corrosion Behaviour of Selective Laser Melted Ti-6Al-4V Alloy
    Antony, K.
    Rakeshnat, T. R.
    Sankar, A.
    Bharath, P. B.
    Ebenezer, J. R.
    LASERS IN ENGINEERING, 2023, 54 (1-3) : 137 - 155
12345