Prediction of the deformation behavior of a selective laser-melted Ti-6Al-4V alloy as a function of process parameters

被引：0
|
作者：
Mostafa Mahdavi
Elham Mirkoohi
Eric Hoar
Steven Liang
Hamid Garmestani
机构：
[1] Georgia Institute of Technology,School of Materials Science and Engineering
[2] Georgia Institute of Technology,Woodruff School of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2020年 / 107卷
关键词：
Ti-6Al-4V; Selective laser method; Additive manufacturing; Deformation behavior;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Recent studies have shown that the mechanical properties of Ti alloys produced by additive manufacturing (AM) methods are sensitive to AM process parameters. The mechanical threshold stress (MTS) model is capable of predicting the flow stress behavior of materials; however, the parameters needed in the MTS model are affected by the microstructure that originates from the AM process parameters. To find a relationship between the AM process parameters and the MTS parameters, the effect of process parameters on the mechanical properties of selective laser-melted (SLM) Ti-6Al-4V samples was studied. As the MTS model is sensitive to the microstructure, only near fully dense samples were considered.
引用
收藏
页码：4069 / 4076
页数：7
相关论文
共 50 条
  • [1] Prediction of the deformation behavior of a selective laser-melted Ti-6Al-4V alloy as a function of process parameters
    Mandavi, Mostafa
    Mirkoohi, Elham
    Hoar, Eric
    Liang, Steven
    Garmestani, Hamid
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 107 (9-10): : 4069 - 4076
  • [2] Wetting and Spreading of AgCuTi on Selective Laser-Melted Ti-6Al-4V
    Hao, Lujing
    Liu, Jiankun
    Li, Yulong
    MATERIALS, 2021, 14 (17)
  • [3] Surface and property characterization of selective laser-melted Ti-6Al-4V alloy after laser polishing
    Jiejing Li
    Huayang Wu
    Haixu Liu
    Dunwen Zuo
    The International Journal of Advanced Manufacturing Technology, 2023, 128 : 703 - 714
  • [4] Surface and property characterization of selective laser-melted Ti-6Al-4V alloy after laser polishing
    Li, Jiejing
    Wu, Huayang
    Liu, Haixu
    Zuo, Dunwen
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 128 (1-2): : 703 - 714
  • [5] Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V
    Qiu, Chunlei
    Adkins, Nicholas J. E.
    Attallah, Moataz M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 578 : 230 - 239
  • [6] Influence of process parameter and strain rate on the dynamic compressive properties of selective laser-melted Ti-6Al-4V alloy
    Pang, Zhicong
    Liu, Yang
    Li, Ming
    Zhu, Chunli
    Li, Shuxin
    Wang, Yonggang
    Wang, Di
    Song, Changhui
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2019, 125 (02):
  • [7] Effect of Build Orientation on the Microstructure and Mechanical Properties of Selective Laser-Melted Ti-6Al-4V Alloy
    Hartunian, Patrick
    Eshraghi, Mohsen
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2018, 2 (04):
  • [8] Influence of process parameter and strain rate on the dynamic compressive properties of selective laser-melted Ti-6Al-4V alloy
    Zhicong Pang
    Yang Liu
    Ming Li
    Chunli Zhu
    Shuxin Li
    Yonggang Wang
    Di Wang
    Changhui Song
    Applied Physics A, 2019, 125
  • [9] Prediction of microstructure in selective laser melted Ti-6Al-4V alloy by cellular automaton
    Yang, Jingjing
    Yu, Hanchen
    Yang, Huihui
    Li, Fanzhi
    Wang, Zemin
    Zeng, Xiaoyan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 748 : 281 - 290
  • [10] Effect of Overlapping Remelting on Microstructures and Mechanical Properties of Selective Laser-Melted Ti-6Al-4V Alloy
    Wang, Qipeng
    Kong, Jian
    Liu, Xiangkui
    Song, Xinxiang
    Dong, Kewei
    Yang, Yang
    ADVANCED ENGINEERING MATERIALS, 2022, 24 (03)
12345