Analysis of laser cladding process parameter influence on the clad bead geometry

被引：2
|
作者：
Dara Moazami Goodarzi
Joonas Pekkarinen
Antti Salminen
机构：
[1] Lappeenranta University of Technology,Resea rch group of laser processing, Department of mechanical engineering
[2] Lappeenranta University of Technology,Research group of laser processing Turku, Department of mechanical engineering
[3] Machine Technology Centre Turku Ltd,undefined
来源：
Welding in the World | 2017年 / 61卷
关键词：
Fiber laser; Laser cladding; Cladding speed; Laser power; Powder feed rate; Design of experiment; DOE;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In the present study, fiber laser has been used in laser cladding with an off-axis powder injection. The aim of this study is to analyze the effects of the laser cladding process parameters on the clad layer geometry. The parameters studied were laser power, cladding speed, and powder feeding rate. This study was conducted by using single-pass clad layers. The powder material used was stainless steel AISI 316L and the substrate material used was structural steel S355. The relationship between the laser cladding process parameters and the clad layer geometry was established by using statistical analysis.
引用
收藏
页码：883 / 891
页数：8
相关论文
共 50 条
  • [31] Laser cladding process parameter optimization method based on grey relational analysis and ACDE algorithm
    Du Y.
    Zhou Z.
    Xu L.
    Hu Y.
    Shu L.
    Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 2022, 28 (01): : 149 - 160
  • [32] Prediction of the efficient heat flux to get an accurate thermal and clad geometry characteristic during laser cladding
    Diwakar, Vikas
    Sharma, Ashwani
    Chaudhari, Abhimanyu
    Yusufzai, Mohd Zaheer Khan
    Vashista, Meghanshu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
  • [33] Process parameter optimization and EBSD analysis of Ni60A-25% WC laser cladding
    Wu, Sha
    Liu, Zenghua
    Huang, Xiaofei
    Wu, Yufeng
    Gong, Yu
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 101
  • [34] Influence of Process Parameters on Weld Bead Geometry and Mechanical Properties in GTAW
    Kant, Radha
    Pandey, Shailendra
    Singh, Renu
    Tanwar, Pranay
    TRENDS IN MANUFACTURING PROCESSES, ICFTMM 2018, 2020, : 111 - 117
  • [35] A simple correlation between the geometry of laser cladding tracks and the process parameters
    Colaco, R
    Costa, L
    Guerra, R
    Vilar, R
    LASER PROCESSING: SURFACE TREATMENT AND FILM DEPOSITION, 1996, 307 : 421 - 429
  • [36] Influence of Laser Cladding Process Parameters on Morphology of Cladding Layer and Its Optimization
    Yu T.-B.
    Song B.-X.
    Xi W.-C.
    Ma Z.-L.
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2019, 40 (04): : 537 - 542
  • [37] An analytical model of the laser clad geometry
    Lalas, C.
    Tsirbas, K.
    Salonitis, K.
    Chryssolouris, G.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 32 (1-2): : 34 - 41
  • [38] Influence of process parameters on single weld seam geometry and process stability in Laser Hot-Wire Cladding of AISI 52100
    Budde, L.
    Biester, K.
    Lammers, M.
    Hermsdorf, J.
    Kaierle, S.
    Overmeyer, L.
    ADVANCES IN INDUSTRIAL AND MANUFACTURING ENGINEERING, 2023, 7
  • [39] An analytical model of the laser clad geometry
    C. Lalas
    K. Tsirbas
    K. Salonitis
    G. Chryssolouris
    The International Journal of Advanced Manufacturing Technology, 2007, 32 : 34 - 41
  • [40] Effect of welding parameters on dilution and weld bead geometry in cladding
    Nouri, M.
    Abdollah-Zadeh, A.
    Malek, F.
    Journal of Materials Science and Technology, 2007, 23 (06): : 817 - 822
12345