Analysis of laser cladding process parameter influence on the clad bead geometry

被引：2
|
作者：
Dara Moazami Goodarzi
Joonas Pekkarinen
Antti Salminen
机构：
[1] Lappeenranta University of Technology,Resea rch group of laser processing, Department of mechanical engineering
[2] Lappeenranta University of Technology,Research group of laser processing Turku, Department of mechanical engineering
[3] Machine Technology Centre Turku Ltd,undefined
来源：
Welding in the World | 2017年 / 61卷
关键词：
Fiber laser; Laser cladding; Cladding speed; Laser power; Powder feed rate; Design of experiment; DOE;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In the present study, fiber laser has been used in laser cladding with an off-axis powder injection. The aim of this study is to analyze the effects of the laser cladding process parameters on the clad layer geometry. The parameters studied were laser power, cladding speed, and powder feeding rate. This study was conducted by using single-pass clad layers. The powder material used was stainless steel AISI 316L and the substrate material used was structural steel S355. The relationship between the laser cladding process parameters and the clad layer geometry was established by using statistical analysis.
引用
收藏
页码：883 / 891
页数：8
相关论文
共 50 条
  • [1] Analysis of laser cladding process parameter influence on the clad bead geometry
    Goodarzi, Dara Moazami
    Pekkarinen, Joonas
    Salminen, Antti
    WELDING IN THE WORLD, 2017, 61 (05) : 883 - 891
  • [2] A Methodology for Investigating and Modelling Laser Clad Bead Geometry and Process Parameter Relationships
    Aggarwal, Kush
    Urbanic, Ruth
    Aggarwal, Luv
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2014, 7 (02) : 269 - 279
  • [3] Development of predictive models for effective process parameter selection for single and overlapping laser clad bead geometry
    Aggarwal, Kush
    Urbanic, R. J.
    Saqib, Syed Mohammad
    RAPID PROTOTYPING JOURNAL, 2018, 24 (01) : 214 - 228
  • [4] Using Predictive Modeling and Classification Methods for Single and Overlapping Bead Laser Cladding to Understand Bead Geometry to Process Parameter Relationships
    Urbanic, R. J.
    Saqib, S. M.
    Aggarwal, K.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (05):
  • [5] Multiphysics simulation of laser cladding process to study the effect of process parameters on clad geometry
    Parekh, Ravi
    Buddu, Ramesh Kumar
    Patel, R. I.
    3RD INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING 2016, ICIAME 2016, 2016, 23 : 529 - 536
  • [6] High-Speed Laser Cladding on Thin-Sheet-Substrates-Influence of Process Parameters on Clad Geometry and Dilution
    Sommer, Niklas
    Stredak, Florian
    Boehm, Stefan
    COATINGS, 2021, 11 (08)
  • [7] Analysis of the Process Parameter Influence in Laser Cladding of 316L Stainless Steel
    Alvarez, Piera
    Angeles Montealegre, M.
    Pulido-Jimenez, Jose F.
    Inaki Arrizubieta, Jon
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2018, 2 (03):
  • [8] Formation of cross-sectional profile of a clad bead in coaxial laser cladding
    Liu, Jichang
    OPTICS AND LASER TECHNOLOGY, 2007, 39 (08): : 1532 - 1536
  • [9] The Influence of Process Parameters on Geometry Characteristics by Three Beams Laser Cladding
    Liu F.
    Ji S.
    Fu G.
    Shi S.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2020, 56 (15): : 227 - 237
  • [10] Laser cladding of Inconel 718 powder on a non-weldable substrate: Clad bead geometry-solidification cracking relationship
    Alizadeh-Sh, M.
    Marashi, S. P. H.
    Ranjbarnodeh, E.
    Shoja-Razavi, R.
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 (56) : 54 - 62
12345