Residual toughness of poly(acrylonitrile-butadiene-styrene) (ABS) after fatigue loading—effect of uniaxial fatigue loading

被引：0
|
作者：
H. J. Kwon
P.-Y. B. Jar
Z. Xia
机构：
[1] University of Alberta,Department of Mechanical Engineering
来源：
Journal of Materials Science | 2004年 / 39卷
关键词：
Fatigue; Fracture Behavior; Scanning Electron Microscopy Analysis; Damage Development; Damage Zone;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Toughness variation of non-notched poly(acrylonitrile-butadiene-styrene) (ABS) subjected to uniaxial fatigue loading was investigated. The experiments were conducted by applying fatigue loading to strip specimens first, from which dog-bone specimens were machined. The dog-bone specimens were tested to measure the strain for the on-set of fracture, named cracking strain here, thus to monitor the toughness change due to the fatigue loading.
引用
收藏
页码：4821 / 4828
页数：7
相关论文
共 50 条
  • [41] Characterisation of the compatibility of isotactic polypropylene/poly(acrylonitrile-butadiene-styrene) (iPP/ABS) blends by aid of dynamic rheological responses
    Liu J.
    Pan Y.
    Materials Research Innovations, 2021, 25 (04) : 243 - 248
  • [42] Effect of carbon nanotubes functionalization on properties of their nanocomposites with polycarbonate/poly(acrylonitrile-butadiene-styrene) matrix
    Granada, Jonas E.
    Maron, Guilherme K.
    Beatrice, Cesar A. G.
    Larocca, Nelson M.
    Moreira, Eduardo C.
    Alano, José H.
    Pessan, Luiz A.
    Santana, Ruth M. C.
    Carreño, Neftali L. V.
    de Oliveira, Amanda D.
    Journal of Applied Polymer Science, 2021, 138 (21):
  • [43] Effect of Compatibilizer and Flexibilizer on the Mechanical Properties of Acrylonitrile-Butadiene-Styrene)/Poly (methyl methacrylate) Blends
    Wang Shouhai
    Gao Jun
    Fei Guren
    Zhang Ping
    Huang Jun
    Xu Lili
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE IV, PTS 1-5, 2014, 496-500 : 317 - +
  • [44] Effect of organoclays on the rheological and morphological properties of poly(acrylonitrile-butadiene-styrene)/poly(methyl methacrylate)/clay nanocomposites
    Nazari, Tayebe
    Garmabi, Hamid
    POLYMER COMPOSITES, 2012, 33 (11) : 1893 - 1902
  • [45] ESR imaging and FTIR study of thermally treated poly(acrylonitrile-butadiene-styrene) (ABS) containing a hindered amine stabilizer: Effect of polymer morphology, and butadiene and stabilizer content
    Motyakin, Mikhail V.
    Schlick, Shulamith
    POLYMER DEGRADATION AND STABILITY, 2006, 91 (07) : 1462 - 1470
  • [46] EFFECT OF COMPRESSIVE STRESS ON FATIGUE OF ALUMINA UNDER UNIAXIAL CYCLIC LOADING
    KIM, KT
    SUH, J
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1993, 76 (01) : 229 - 231
  • [47] Waveform effect on fatigue properties of intact sandstone in uniaxial cyclical loading
    Bagde, MN
    Petros, V
    ROCK MECHANICS AND ROCK ENGINEERING, 2005, 38 (03) : 169 - 196
  • [48] Waveform Effect on Fatigue Properties of Intact Sandstone in Uniaxial Cyclical Loading
    M. N. Bagde
    V. Petroš
    Rock Mechanics and Rock Engineering, 2005, 38 : 169 - 196
  • [49] Mechanical properties and morphology of polypropylene/poly(acrylonitrile-butadiene-styrene) nanocomposites: Effect of compatibilizer and montmorillonite content
    Ibrahim, Mohamad Al Hafiz
    Hassan, Azman
    Wahit, Mat Uzir
    Hasan, Mahbub
    Mokhtar, Munirah
    JOURNAL OF ELASTOMERS AND PLASTICS, 2017, 49 (03): : 209 - 225
  • [50] EFFECT OF THICKNESS ON SURFACE-POTENTIAL CHARACTERISTICS OF CORONA CHARGED POLY(ACRYLONITRILE-BUTADIENE-STYRENE) LAYERS
    SHARMA, SK
    GUPTA, AK
    ACTA POLYMERICA, 1989, 40 (08) : 552 - 553
12345