Analytical Formula for Load-Carrying Capacity of Eccentrically Loaded CFDT Columns and Performance Comparison with CFST Columns Under Seismic Loads

被引:0
|
作者
Saeed Asadollahi
Mojtaba Labibzadeh
Farhad Hosseinlou
Amin Khajehdezfuly
机构
[1] Shahid Chamran University of Ahvaz,Faculty of Civil Engineering and Architecture
关键词
Concrete-filled double-tube column; Composite tall structures; Confinement factor; Eccentric axial load capacity; Parametric study;
D O I
暂无
中图分类号
学科分类号
摘要
Concrete-filled double-tube (CFDT) columns are a new idea in designing and building structures. In this manuscript, the effect of various parameters (yield stress of the steel tube, the characteristic strength of concrete, the arrangement of steel tubes, and the ratio of the diameter to the thickness of the steel tubes) on the bearing capacity of eccentrically loaded CFDT columns is studied for the first time. Using ABAQUS software, the finite element model is validated based on available laboratory specimens. The bearing capacity of eccentrically loaded CFDT columns with different material and mechanical specifications is compared in the form of P-M diagrams. The results show that by increasing the yield stress of the outer tube, increasing the diameter of the outer tube and increasing the strength of the outer concrete, the bearing capacity of the CFDT column is increased. Based on the failure modes of the CFDT column under the eccentric load, the outer concrete has the most damage in the tension and compression mode. In addition, the ductility and energy absorption capacity are compared between the CFDT and the concrete-filled steel tube (CFST) columns. Based on this comparison, the performance of the CFDT column is better under eccentric loading. Finally, a formula for designing and determining the bearing capacity of eccentrically loaded CFDT columns is proposed. In the last part of the work, the seismic performance of multi-story buildings equipped with the CFDT and CFST columns under a real earthquake is examined. In terms of seismic performance, the frames equipped with the CFDT columns have more energy absorption and base shear than the frames equipped with the CFST columns. Also, the displacement of the roof related to the bending frame with CFDT columns is less than the frame with CFST columns. The results indicate that CFDT columns improve the seismic performance of tall buildings.
引用
收藏
页码:3033 / 3054
页数:21
相关论文
共 50 条
  • [31] Experimental and Numerical Investigation of Transverse Circular Holes on Load-Carrying Capacity of RC Columns
    Tahir, Muhammad Fiaz
    Shabbir, Faisal
    Ahmad, Afaq
    Ejaz, Naeem
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2021, 45 (02) : 683 - 696
  • [32] Analytical assessment of the load-carrying capacity of axially loaded wooden reinforced tubes
    Cabrero, J. M.
    Heiduschke, A.
    Haller, P.
    COMPOSITE STRUCTURES, 2010, 92 (12) : 2955 - 2965
  • [33] Load-carrying Capacity of Cold-formed Steel Columns with Complicated Section Under Eccentric Compression Loading
    Wang, Chungang
    Xu, Zifeng
    Zhang, Zhuangnan
    Cao, Yufei
    CIVIL, STRUCTURAL AND ENVIRONMENTAL ENGINEERING, PTS 1-4, 2014, 838-841 : 601 - 604
  • [34] Load-carrying capacities of pultruded GFRP I-section columns under eccentric load
    Fan, Jiuhong
    Di, Jin
    He, Lei
    Xiao, Bowen
    Su, Yi
    COMPOSITE STRUCTURES, 2024, 329
  • [35] CHARACTERISTICS OF BEARING CAPACITY OF SQUARE CFST COLUMNS WITH BINDING BARS UNDER ECCENTRIC LOADS
    Cai, Jian
    Zhu, Chang-Hong
    Su, Guang-Qun
    Lin, Huan-Bin
    Zhong, Guo-Kun
    ISISS '2009: INNOVATION & SUSTAINABILITY OF STRUCTURES, VOLS 1 AND 2, 2009, : 669 - 674
  • [36] Seismic jacketing of RC columns for enhanced axial load carrying performance
    Tsai, KC
    Lin, ML
    JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2002, 25 (04) : 389 - 402
  • [37] Seismic jacketing of RC columns for enhanced axial load carrying performance
    Tsai, KC
    Lin, ML
    LARGE-SCALE STRUCTURAL TESTING, 2003, 211 : 183 - 200
  • [38] Direct strength-method study on ultimate load-carrying capacity of eccentrically loaded lipped channels
    Wang, Chun-Gang
    Zhang, Yao-Chun
    Gongcheng Lixue/Engineering Mechanics, 2009, 26 (02): : 97 - 102
  • [39] Neural network modeling of the load-carrying capacity of eccentrically-loaded single-angle struts
    Sakla, SSS
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2004, 60 (07) : 965 - 987
  • [40] The structural performance of axially loaded CFST columns under various loading conditions
    Huang, Fuyun
    Yu, Xinmeng
    Chen, Baochun
    STEEL AND COMPOSITE STRUCTURES, 2012, 13 (05): : 451 - 471