Tribological Properties of Surface Friction Hardened AISI 316L Steel

被引：2
|
作者：
Khaksaran, A. [1 ]
Taghiabadi, R. [1 ]
Jafarzadegan, M. [1 ]
机构：
[1] Imam Khomeini Int Univ, Dept Mat Sci, Qazvin, Iran
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2021年 / 74卷 / 08期
关键词：
AISI; 316L; Friction hardening; Hardness; Tribology; Friction; wear;
D O I：
10.1007/s12666-021-02306-6
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Friction hardening was employed to improve the tribological properties of AISI 316L austenitic stainless steel (ASS 316L). The process was conducted using a hard indenter (74 +/- 1 HRC) under the travel speeds of 90, 180, and 360 mm/s for 30 and 60 passes. The results showed that FH increased the surface hardness of annealed ASS 316L alloy by 180%. The sliding wear tests also showed the positive impact of FH on the wear resistance and friction behaviour. For instance, at the applied pressure of 1 MPa, the wear rate and coefficient of friction (COF) of FHed ASS 316L sample (90 mm/s, 30 passes) were reduced by 68 and 20%, respectively, as compared to those of the annealed sample.
引用
收藏
页码：1979 / 1989
页数：11
相关论文
共 50 条
  • [21] Cryogenic mechanical properties and tribological behaviors of AISI stainless 316L steel cooled by liquid nitrogen
    Xu, Jimin
    He, Longgui
    Cheng, Shuo
    Fang, Xiaoliang
    Cryogenics, 2025, 147
  • [22] Investigation of interface microstructure properties of AISI 316l/AISI 4140 steel couple welded by friction welding process
    Unal, Engin
    Karaca, Faruk
    Sarsilmaz, Furkan
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2019, 34 (02): : 702 - 708
  • [23] Effect of surface treatment on the surface characteristics of AISI 316L stainless steel
    Trigwell, Steve
    Selvaduray, Guna
    MEDICAL DEVICE MATERIALS III: PROCEEDINGS FROM THE MATERIALS & PROCESSES FOR MEDICAL DEVICES CONFERENCE 2005, 2006, : 208 - +
  • [24] Intergranular corrosion of AISI 316L steel
    Matula, M
    Hyspecka, L
    Svoboda, M
    Vodarek, V
    Dagbert, C
    Galland, J
    Stonawska, Z
    Tuma, L
    MATERIALS CHARACTERIZATION, 2001, 46 (2-3) : 203 - 210
  • [25] Microstructure and mechanical properties of friction stir welded AISI 316L austenitic stainless steel joints
    Kumar, S. Shashi
    Murugan, N.
    Ramachandran, K. K.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 254 : 79 - 90
  • [26] Tribological Response of Mechanical Attrition Treated Surface of AISI 316L Steel: The Role of Velocity of Colliding Balls
    Joshi, Manoj D.
    Kumar, Vikesh
    Singh, Indrasen
    Hosmani, Santosh S.
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2021, 143 (03):
  • [27] Tribological response of mechanical attrition treated surface of AISI 316L steel: The role of velocity of colliding balls
    Joshi, Manoj D.
    Kumar, Vikesh
    Singh, Indrasen
    Hosmani, Santosh S.
    Joshi, Manoj D. (phd1801205008@iiti.ac.in), 1600, American Society of Mechanical Engineers (ASME) (143):
  • [28] Influence of the Gas Pressure of Plasma Nitriding on the Structural, Mechanical and Tribological Surface Properties of AISI 316L
    Campos, Marcelo
    de Souza, Solange
    Davim, Joao Paulo
    de Souza, Sylvio Dionysio
    Olzon-Dionysio, Maristela
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (04):
  • [29] MECHANICAL PROPERTIES OF DUPLEX TREATED AISI 316L STAINLESS STEEL
    Joska, Zdenek
    Kadlec, Jaromir
    Hruby, Vojtech
    Svoboda, Emil
    METAL 2011: 20TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2011, : 724 - 728
  • [30] Tribological Properties of Friction Pair between 316L Stainless Steel and CF/PEEK with Nonsmooth Surface under Seawater Lubrication
    Liang, Yingna
    Gao, Dianrong
    Zhao, Jianhua
    TRIBOLOGY TRANSACTIONS, 2020, 63 (04) : 658 - 671
12345