Wide-gap brazing of IN738 and the bonding strength using Ni-based filler metal powders

被引：2
|
作者：
Kim, Y. H. [1 ]
Kim, I. H. [2 ]
Kim, K. T. [1 ]
Shin, S. Y. [1 ]
机构：
[1] Korea Inst Ind Technol, Adv Funct Mat Team, 7-47 Songdo, Inchon 406800, South Korea
[2] Korea Inst Ind Technol, Adv Mat Div, Inchon 406-800, South Korea
来源：
MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2 | 2007年 / 345-346卷
关键词：
wide-gap brazing; IN738; superalloy; additive powder; bonding strength; eutectic;
D O I：
10.4028/www.scientific.net/KEM.345-346.1449
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure and bonding strength of the wide-gap region brazed with different filler metal powder (BNi-3 and DF 4B) and various powder mixing ratios of additive powder to filler metal powder were investigated. The microstructure characterization showed that Cr borides with a blocky morphology were existed in the brazed region in both filler metal powder, The bonding strength of the wide-gap region brazed with 60 wt.% IN738 additive and 40 wt.% DF 413 powder exhibited 92% tensile strength of IN738 superalloy at room temperature. The Cracks in the wide-gap brazed region initiated at the intermetallic compound and eutectic structure, and then propagated through them.
引用
收藏
页码：1449 / +
页数：2
相关论文
共 46 条
  • [11] Microstructure and Electrochemical Corrosion Behavior of Fe–Cr System Alloys as Substitutes for Ni-Based Brazing Filler Metal
    Kangdao Shi
    Takahiro Tsunoda
    Ikuo Shohji
    Kotaro Matsu
    Yasuhiro Taguchi
    Acta Metallurgica Sinica (English Letters), 2016, 29 : 697 - 706
  • [12] A study on induction brazing of diamond grits using both amorphous and crystalline Ni-based filler alloy
    Bojiang Ma
    Huadong Zhu
    The International Journal of Advanced Manufacturing Technology, 2016, 86 : 1607 - 1613
  • [13] Microstructural evolution and mechanical properties of Ni-based superalloy joints brazed using a ternary Ni-W-B amorphous brazing filler metal
    Xie, Chenlang
    Deng, Kaiyang
    Teng, Junfei
    Fu, Junying
    Li, Ran
    Zhang, Tao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 960
  • [14] Identification of phases in the wide-gap region brazed with BNO filler metal powder using electron backscatter diffraction
    Kim, Y. H.
    Kim, I. H.
    Kim, K. T.
    Shin, S. Y.
    Kwun, S. I.
    ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 : 355 - +
  • [15] A study on induction brazing of diamond grits using both amorphous and crystalline Ni-based filler alloy
    Ma, Bojiang
    Zhu, Huadong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (5-8): : 1607 - 1613
  • [16] Effect of mixing ratio on mechanical properties of wide-gap brazed Ni-based superalloy with Ni-Si-B alloy powder
    Kim, YH
    Kim, KT
    Kim, IH
    FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 : 935 - 940
  • [17] Influence of Brazing Temperature on Strength and Structure of SUS304 Stainless Steel Brazed System with BNi-2 Filler Metal Fundamental Study on Brazeability with Ni-Based Filler Metal(II)
    Lee, Yong-Won
    Kim, Jong-Hoon
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2007, 17 (03): : 179 - 183
  • [18] Microstructure and Electrochemical Corrosion Behavior of Fe-Cr System Alloys as Substitutes for Ni-Based Brazing Filler Metal
    Kangdao Shi
    Takahiro Tsunoda
    Ikuo Shohji
    Kotaro Matsu
    Yasuhiro Taguchi
    ActaMetallurgicaSinica(EnglishLetters), 2016, 29 (08) : 697 - 706
  • [19] Microstructure and Electrochemical Corrosion Behavior of Fe-Cr System Alloys as Substitutes for Ni-Based Brazing Filler Metal
    Shi, Kangdao
    Tsunoda, Takahiro
    Shohji, Ikuo
    Matsui, Kotaro
    Taguchi, Yasuhiro
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2016, 29 (08) : 697 - 706
  • [20] Phase transformation study during diffusion brazing of γ-TiAl intermetallic using amorphous Ni-based filler metals
    Kokabi, Dariush
    Kaflou, Ali
    MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (15) : 1639 - 1647
12345