Canola straw chemimechanical pulping for pulp and paper production

被引：54

作者：

Hosseinpour, Reza ^{[3
]}

Fatehi, Pedram ^{[1
,2
]}

Latibari, Ahmad Jahan ^{[3
]}

Ni, Yonghao ^{[1
,2
]}

Sepiddehdam, S. Javad ^{[3
]}

机构：

[1] Univ New Brunswick, Limerick Pulp & Paper Ctr, Fredericton, NB E3B 5A3, Canada

[2] Univ New Brunswick, Dept Chem Engn, Fredericton, NB E3B 5A3, Canada

[3] Islamic Azad Univ, Agr Res Ctr, Karaj Branch, Karaj, Iran

来源：

BIORESOURCE TECHNOLOGY | 2010年 / 101卷 / 11期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Chemimechanical pulping; Canola straw; Non-wood; Fiber characteristics; Strength properties; WHEAT-STRAW; OPTICAL-PROPERTIES; BAGASSE CMP; PEROXIDE; FIBER; PRETREATMENT; IMPACT; GRASS; WOOD;

D O I：

10.1016/j.biortech.2010.01.055

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

Non-wood is one of the most important raw materials for pulp and paper production in several countries due to its abundance and cost-effectiveness. However, the pulping and papermaking characteristics of canola straw have rarely been investigated. The objective of this work was to determine the potential application of canola straw in the chemimechanical pulping (CMP) process. At first, the chemical composition and characteristics of canola straw were assessed and compared with those of other non-woods. Then, the CMP pulping of canola straw was conducted using different dosages of sodium sulfite and sodium hydroxide. The results showed that, by applying a mild chemical pretreatment, i.e., 4-12% (wt.) NaOH and 8-12% (wt.) Na2SO3, in the CMP pulping of canola straw, the pulp brightness reached almost 40%ISO, and the strength properties were comparable to those of bagasse CMP and of wheat straw CMP. The impact of post-refining on the properties of canola straw CMP was also discussed in this work. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：4193 / 4197

页数：5

共 50 条

[31] IMPROVED STRAW PULP FOR CORRUGATING PAPER
SUTCLIFFE, HM
ARONOVSKY, SI
WILKINSON, RM
BURNHAM, WD
PHILLIPS, WA
CARPENTER, ER
TAPPI, 1950, 33 (08): : 353 - 357
[32] CHEMIMECHANICAL PULPING OF EUCALYPTUS-GRANDIS
AREA, MC
GAVAZZO, GB
FELISSIA, FE
VALADE, JL
WOOD AND FIBER SCIENCE, 1995, 27 (04): : 368 - 378
[33] SULFONATION TREATMENTS FOR CHEMIMECHANICAL PULPING OF SOFTWOODS
SINKEY, JD
APPITA, 1983, 36 (04): : 301 - 307
[34] Polyhydroxyalkanoates production using canola oil by bacteria isolated from paper pulp industry
Younas, Tayyaba
Ali, Iftikhar
Jamil, Nazia
KUWAIT JOURNAL OF SCIENCE, 2015, 42 (02) : 236 - 249
[35] PERCARBONATE CHEMIMECHANICAL PULPING OF SOME HARDWOODS
MARTON, R
CZERKIES, A
GRANZOW, SG
TAPPI JOURNAL, 1986, 69 (08): : 98 - 101
[36] Energy and carbon coupled water footprint analysis for straw pulp paper production
Ma, Xiaotian
Zhai, Yijie
Zhang, Ruirui
Shen, Xiaoxu
Zhang, Tianzuo
Ji, Changxing
Yuan, Xueliang
Hong, Jinglan
JOURNAL OF CLEANER PRODUCTION, 2019, 233 : 23 - 32
[37] Process selection for chemimechanical pulping of aspen
Xu, EC
Sabourin, MJ
PULP & PAPER-CANADA, 2002, 103 (03) : 36 - 39
[38] THE EFFECT OF ANTHRAQUINONE ON CHEMIMECHANICAL PULPING OF PINE
SJOHOLM, R
PAPERI JA PUU-PAPER AND TIMBER, 1982, 64 (10): : 587 - 590
[39] Optimization of pulp properties by dimethyl formamide pulping of rice straw
Ghozatloo, A.
Mohammadi-Rovshandeh, J.
Hashemi, S. J.
CELLULOSE CHEMISTRY AND TECHNOLOGY, 2006, 40 (08): : 659 - 667
[40] Mono Ethanol Amine (MEA) Pulping of Wheat Straw: An Environmentally Friendly Suggestion for the Fluff Pulp Production
Ismaeilimoghadam, Saeed
Mahdavi, Saeed
Pourhashemi, Mehdi
Shahraki, Afsaneh
Jonoobi, Mehdi
Journal of Renewable Materials, 2024, 12 (10) : 1771 - 1789

← 1 2 3 4 5 →