Canola straw chemimechanical pulping for pulp and paper production

被引：54

作者：

Hosseinpour, Reza ^{[3
]}

Fatehi, Pedram ^{[1
,2
]}

Latibari, Ahmad Jahan ^{[3
]}

Ni, Yonghao ^{[1
,2
]}

Sepiddehdam, S. Javad ^{[3
]}

机构：

[1] Univ New Brunswick, Limerick Pulp & Paper Ctr, Fredericton, NB E3B 5A3, Canada

[2] Univ New Brunswick, Dept Chem Engn, Fredericton, NB E3B 5A3, Canada

[3] Islamic Azad Univ, Agr Res Ctr, Karaj Branch, Karaj, Iran

来源：

BIORESOURCE TECHNOLOGY | 2010年 / 101卷 / 11期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Chemimechanical pulping; Canola straw; Non-wood; Fiber characteristics; Strength properties; WHEAT-STRAW; OPTICAL-PROPERTIES; BAGASSE CMP; PEROXIDE; FIBER; PRETREATMENT; IMPACT; GRASS; WOOD;

D O I：

10.1016/j.biortech.2010.01.055

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

Non-wood is one of the most important raw materials for pulp and paper production in several countries due to its abundance and cost-effectiveness. However, the pulping and papermaking characteristics of canola straw have rarely been investigated. The objective of this work was to determine the potential application of canola straw in the chemimechanical pulping (CMP) process. At first, the chemical composition and characteristics of canola straw were assessed and compared with those of other non-woods. Then, the CMP pulping of canola straw was conducted using different dosages of sodium sulfite and sodium hydroxide. The results showed that, by applying a mild chemical pretreatment, i.e., 4-12% (wt.) NaOH and 8-12% (wt.) Na2SO3, in the CMP pulping of canola straw, the pulp brightness reached almost 40%ISO, and the strength properties were comparable to those of bagasse CMP and of wheat straw CMP. The impact of post-refining on the properties of canola straw CMP was also discussed in this work. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：4193 / 4197

页数：5

共 50 条

[1] Chemimechanical pulping of canola straw for the production of corrugating medium paper grades
Fatehi, Pedram
Hosseinpour, Reza
Latibari, Ahmad Jahan
Ni, Yonghao
APPITA JOURNAL, 2011, 64 (05): : 450 - 455
[2] Hydrogen peroxide bleaching of canola straw chemimechanical pulp
Fatehi, P. (pfatehi@lakeheadu.ca), 1600, North Carolina State University (09):
[3] Hydrogen Peroxide Bleaching of Canola Straw Chemimechanical Pulp
Hosseinpour, Reza
Latibari, Ahmad Jahan
Fatehi, Pedram
BIORESOURCES, 2014, 9 (01): : 1201 - 1211
[4] Production of paper grade pulp by organic acid based pulping of wheat straw
Ghosh, U.K.
IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association, 2006, 18 (SPEC. ISS.) : 45 - 47
[5] SULPHITE/QUINONE PULPING FOR PRODUCTION OF CHEMIMECHANICAL PULP FROM JACK PINE.
Tay, C.H.
Fairchild, R.S.
Manchester, D.F.
Journal of Pulp and Paper Science, 1984, 10 (05): : 134 - 139
[6] Utilisation of straw for the production of pulp and paper
Schott, S
Chaussy, D
Mauret, E
PAPERI JA PUU-PAPER AND TIMBER, 2001, 83 (06): : 453 - 457
[7] THE CURRENT STATE OF THE ART OF CHEMIMECHANICAL GROUNDWOOD PULPING RELATED TO THE PRODUCTION OF PRINTING PAPER
ATACK, D
HEITNER, C
PAPIER, 1982, 36 (10A): : V114 - V127
[8] Effects of Montmorillonite Nanoclay on the Properties of Chemimechanical Pulping Paper
Kasmani, Jafar Ebrahimpour
Samariha, Ahmad
BIORESOURCES, 2021, 16 (03) : 6281 - 6291
[9] Pulp and paper characterization of rice straw produced from aqueous ethanol pulping
Navaee-Ardeh, S
Rovshandeh, JM
Khodadadi, AA
Pourjoozi, M
CELLULOSE CHEMISTRY AND TECHNOLOGY, 2003, 37 (5-6): : 405 - 413
[10] The Investigations on Pulp and Paper Production with Modified Kraft Pulping Method from Canola (Brassica napus L.) Stalks
Akgul, Mehmet
Erdonmez, Ilhan
Cicekler, Mustafa
Tutus, Ahmet
KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY, 2018, 18 (03): : 357 - 365

← 1 2 3 4 5 →