THERMO-MECHANICAL FATIGUE CRACK GROWTH MODELLING IN A NI-BASED SUPERALLOY SUBJECTED TO SUSTAINED LOAD

被引：0
|
作者：
Storgards, Erik [1 ]
Simonsson, Kjell [1 ]
Sjostrom, Soren [1 ]
Moverare, Johan [2 ]
机构：
[1] Linkoping Univ, Div Solid Mech, SE-58183 Linkoping, Sweden
[2] Linkoping Univ, Div Engn Mat, SE-58183 Linkoping, Sweden
来源：
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 7A | 2015年
关键词：
HOLD-TIME; INCONEL; 718; DYNAMIC EMBRITTLEMENT; BEHAVIOR; ALLOY; PROPAGATION; FRACTURE;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Thermo-mechanical fatigue (TMF) crack growth modelling as been conducted on Inconel 718 with dwell time at maximum;ad. A history dependent damage model taking dwell damage uto account, developed under isothermal conditions, has been xtended for TMF conditions. Parameter determination for the lodel is carried out on isothermal load controlled tests at 55050 C for surface cracks, which later have been used to extrapole parameters used for TMF crack growth. Further, validation 'the developed model is conducted on a notched specimen sub?cted to strain control at 50-550 C. Satisfying results are gained 'ithin reasonable scatter level compared for test and simulated umber of cycles to failure.
引用
收藏
页数：10
相关论文
共 50 条
  • [41] Thermo-mechanical fatigue behavior of a single crystal nickel-based superalloy
    Han, G. M.
    Yu, J. J.
    Sun, X. F.
    Hu, Z. Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (19-20): : 6217 - 6224
  • [42] Influence of PPB on Crack Growth Behavior of PM Ni-Based Superalloy
    Zhang, Ying
    Zhang, Yiwen
    Sun, Zhikun
    Huang, Hubao
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (10): : 3282 - 3288
  • [43] A thermal imaging system for crack growth quantification in thermo-mechanical fatigue specimens
    White, G
    Mueller, A
    Torrington, G
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 15A AND 15B, 1996, 15 : 1961 - 1967
  • [44] Three-dimensional thermo-mechanical fatigue crack growth using BEM
    dell'Erba, DN
    Aliabadi, MH
    INTERNATIONAL JOURNAL OF FATIGUE, 2000, 22 (04) : 261 - 273
  • [45] Influence of PPB on Crack Growth Behavior of PM Ni-Based Superalloy
    Zhang Ying
    Zhang Yiwen
    Sun Zhikun
    Huang Hubao
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (10) : 3282 - 3288
  • [46] An Empirical Approach to Correlating Thermo-Mechanical Fatigue Behaviour of a Polycrystalline Ni-Base Superalloy
    Whittaker, Mark
    Lancaster, Robert
    Harrison, William
    Pretty, Christopher
    Williams, Stephen
    MATERIALS, 2013, 6 (11): : 5275 - 5290
  • [47] Recrystallization During Thermo-Mechanical Fatigue of Two High-Generation Ni-Based Single Crystal Superalloys
    Zhao, Peng
    Xie, Guang
    Duan, Huichao
    Zhang, Jian
    Du, Kui
    ACTA METALLURGICA SINICA, 2023, 59 (09) : 1221 - 1229
  • [48] Experiment and modelling on the effect of microstructural morphology on fatigue life of a Ni-based superalloy
    Fan, Y. S.
    Yang, X. G.
    Tan, L.
    Shi, D. Q.
    Li, S. L.
    Wang, P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 786
  • [49] In Situ Observation of Small Crack Growth and Fatigue Life Modeling for In713C Ni-Based Superalloy
    Li, Xiao-Long
    Liu, Yu-Ke
    Wang, Zi-Wei
    Chen, Rong
    Zhu, Ming-Liang
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2025,
  • [50] Effects of γ′ size and carbide distribution on fatigue crack growth mechanisms at 650 °C in an advanced Ni-based superalloy
    Kim, D.
    Jiang, R.
    Evangelou, A.
    Sinclair, I
    Reed, P. A. S.
    INTERNATIONAL JOURNAL OF FATIGUE, 2021, 145 (145)
12345