Forward kinematics and workspace analysis for a 7-DOF cable-driven humanoid arm

被引：7

作者：

Chen, Weihai ^{[1
]}

Chen, Quanzhu ^{[2
]}

Zhang, Jianbin ^{[2
]}

Yu, Shouqian ^{[1
]}

机构：

[1] Beijing Univ Aeronaut & Astronaut, Sch Automat Sci & Elect Engn, Beijing 100083, Peoples R China

[2] Beijing Univ Aeronaut & Astronaut, Sch Mech Engn & Automat, Beijing 100083, Peoples R China

来源：

2006 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS, VOLS 1-3 | 2006年

关键词：

cable-driven; redurdant kinematics; parallel mechanism;

D O I：

10.1109/ROBIO.2006.340095

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Cable-driven mechanisms have high load capacity. Motivating from the latest research results of humanoid-arm bionics and parallel manipulators, a novel design of cable-driven humanoid-arm, which combines the merits of cable-driven and parallel mechanism, is proposed. This paper introduces the specific structure of cable-driven humanoid arm. The modes of cables distribution and the coupling among joints are also studied. With analysis of the four-cable approach to drive 3-DOF parallel mechanism the relationships between cable lengths and joint angles is analyzed, the motion ranges of joint angles are also discussed. Based on the analysis above, forward kinematics and workspace of the manipulator are analyzed, the pose of end-effector relating to base frame is deduced. At last, according to three groups of kinematic solutions, a simulation by ADAMS is carried out to verify the effectiveness of proposed algorithms.

引用

页码：1175 / +

页数：2

共 50 条

[41] Dynamics modeling and tension analysis for a cable-driven humanoid-arm robot
Chen, Weihai
You, Xianqiang
Cui, Xiang
Yu, Shouqian
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2013, 39 (03): : 335 - 339
[42] Innovative Design Research on a Cable-Driven Humanoid Robotic Arm
Wu, Zhiyuan
Huo, Ye
Ma, Kangji
Song, Yuanzeng
Sun, Haiyan
Cao, Huaizhi
Shao, Zhufeng
2024 9TH INTERNATIONAL CONFERENCE ON AUTOMATION, CONTROL AND ROBOTICS ENGINEERING, CACRE 2024, 2024, : 428 - 434
[43] Self-calibration of a biologically inspired 7 DOF cable-driven robotic arm
Mustafa, Shabbir Kurbahhusen
Yang, Guilin
Yeo, Song Huat
Lin, Wei
Chen, I-Ming
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2008, 13 (01) : 66 - 75
[44] The Kinematics Analysis of a Novel 3-DOF Cable-Driven Wind Tunnel Mechanism
Yao Yu
Wu Hongtao
JOURNAL OF ROBOTICS, 2010, 2010
[45] Neural Network Model for Identifying Workspace, Forward and Inverse Kinematics of the 7-DOF YuMi 14000 ABB Collaborative Robot
Alebooyeh, Morteza
Urbanic, R. Jill
IFAC PAPERSONLINE, 2019, 52 (10): : 176 - 181
[46] The Structural Design, Kinematics, and Workspace Analysis of a Novel Rod-Cable Hybrid Cable-Driven Parallel Robot
Li, Jinrun
Li, Yangmin
BIOMIMETICS, 2025, 10 (01)
[47] Hybrid Inverse Kinematics for a 7-DOF Manipulator Handling Joint Limits and Workspace Constraints
Giessler, Maximilian
Waltersberger, Bernd
ROBOCUP 2023: ROBOT WORLD CUP XXVI, 2024, 14140 : 105 - 116
[48] ANALYSIS OF THE WORKSPACE OF CABLE-DRIVEN FORCE INTERACTIVE ROBOT
Liu, Lili
Zuo, Jihong
UPB Scientific Bulletin, Series D: Mechanical Engineering, 2023, 85 (02): : 3 - 16
[49] The Forward Kinematics of Cable-Driven Parallel Robots with Sagging Cables
Julien, Jean-Pierre Merlet
Alexandre-dit-Sandretto, Julien
CABLE-DRIVEN PARALLEL ROBOTS, 2015, 32 : 3 - 15
[50] Workspace analysis of fully restrained cable-driven manipulators
Cong Bang Pham
Yeo, Song Huat
Yang, Guilin
Chen, I-Ming
ROBOTICS AND AUTONOMOUS SYSTEMS, 2009, 57 (09) : 901 - 912

← 1 2 3 4 5 →