Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer

被引：27
|
作者：
Nami, H. [1 ]
Halvaee, A. [1 ]
Adgi, H. [1 ]
Hadian, A. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Fac Engn, Tehran, Iran
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2010年 / 210卷 / 10期
关键词：
Diffusion bonding; Mechanical properties; Microstructure; Copper interlayer; TITANIUM;
D O I：
10.1016/j.jmatprotec.2010.03.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Diffusion bonding of Al/Mg2Si metal matrix composite (MMC) using Cu interlayer at optimal bonding temperature of 5405 degrees C for various bonding durations was investigated This metal matrix composite (MMC) containing 15% Mg2Si particles was produced by in situ technique Specific diffusion bonding process was introduced as a low vacuum technique The composition and microstructure of the joined areas were examined by X-ray diffraction (XRD) and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (EDS) Microhardness and shear tests were conducted to the samples to evaluate the effect of bonding duration on weldability Several different diffusion layers exist at the bond region depending on the bonding duration The shear strength of Joints increased with bonding duration due to elimination of CuAl2 brittle diffusion layer (C) 2010 Elsevier B V All rights reserved
引用
收藏
页码：1282 / 1289
页数：8
相关论文
共 50 条
  • [31] The microstructure and mechanical characterization of Al-30%Mg2Si composite with Y inoculation addition
    Liu, Tongyu
    Li, Yingmin
    Ren, Yuyan
    Wang, Winxin
    MATERIALS RESEARCH EXPRESS, 2018, 5 (07)
  • [32] Microstructure and mechanical properties of diffusion bonded W/steel joint using V/Ni composite interlayer
    Liu, W. S.
    Cai, Q. S.
    Ma, Y. Z.
    Wang, Y. Y.
    Liu, H. Y.
    Li, D. X.
    MATERIALS CHARACTERIZATION, 2013, 86 : 212 - 220
  • [33] Role B4C Addition on Microstructure, Mechanical, and Wear Characteristics of Al-20%Mg2Si Hybrid Metal Matrix Composite
    Ghandvar, Hamidreza
    Jabbar, Mostafa Abbas
    Koloor, Seyed Saeid Rahimian
    Petru, Michal
    Bahador, Abdollah
    Abu Bakar, Tuty Asma
    Kondoh, Katsuyoshi
    APPLIED SCIENCES-BASEL, 2021, 11 (07):
  • [34] Effect of SiC particle addition on microstructure of Mg2Si/Al composite
    Zhao Yuguang
    Liu Xiaobo
    Yang Yuanyuan
    Bian Tianjun
    China Foundry, 2014, 11 (02) : 91 - 97
  • [35] Effect of holding temperature on semisolid microstructure of Mg2Si/Al composite
    Qin, Q. D.
    Zhao, Y. G.
    Liu, C.
    Cong, P. J.
    Zhou, W.
    Liang, Y. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 416 (1-2) : 143 - 147
  • [36] Effect of SiC particle addition on microstructure of Mg2Si/Al composite
    Zhao Yuguang
    Liu Xiaobo
    Yang Yuanyuan
    Bian Tianjun
    CHINA FOUNDRY, 2014, 11 (02) : 91 - 96
  • [37] Effect of holding temperature on semisolid microstructure of Mg2Si/Al composite
    Qin, Q.D.
    Zhao, Y.G.
    Liu, C.
    Cong, P.J.
    Zhou, W.
    Liang, Y.H.
    Journal of Alloys and Compounds, 2006, 416 (1-2): : 143 - 147
  • [38] The influence of pure Na on the microstructure and tensile properties of Al-Mg2Si metal matrix composite
    Emamy, M.
    Khorshidi, R.
    Raouf, A. Honarbakhsh
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (13-14): : 4337 - 4342
  • [39] Microstructure and dry sliding wear behavior of cast Al–Mg2Si in-situ metal matrix composite modified by Nd
    Xiao-Feng Wu
    Guan-Gan Zhang
    Fu-Fa Wu
    Rare Metals, 2013, 32 : 284 - 289
  • [40] Fabrication and Thermoelectric Properties of Al/Mg2Si Composite Materials
    Hayashibara, Yuta
    Hayashi, Kei
    Ando, Ikumi
    Kubouchi, Masataka
    Ogawa, Yohei
    Saito, Wataru
    Miyazaki, Yuzuru
    MATERIALS TRANSACTIONS, 2018, 59 (07) : 1041 - 1045
12345