Automatic selection of clamping surfaces in the turning process for rotational parts

被引：2

作者：

Rico, JC ^{[1
]}

Valiño, G ^{[1
]}

Mateos, S ^{[1
]}

Cuesta, E ^{[1
]}

Suárez, CM ^{[1
]}

机构：

[1] Sch Engn, Dept Mfg Engn, Gijon, Spain

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2000年 / 214卷 / 08期

关键词：

rotational parts; clamping systems; parts coding; selection strategy; process planning; turning;

D O I：

10.1243/0954405001518071

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents a system for the automatic selection of chucking surfaces in turning rotational parts. The general strategy of the system aims to define all the possible set-ups that allow complete machining of the part. Several criteria have been provided to eliminate those set-ups or set-up combinations incompatible with the process constraints. In particular, the developed system takes into account the geometrical shape of both the part and the chuck as well as the dimensions and the tolerances provided by the design. All the related information is saved in standard databases.

引用

页码：693 / 708

页数：16

共 50 条

[21] Informatics System for Selection of Clamping Surfaces of Workpieces in Machining Fixtures
Seghedin, Neculai Eugen
Chitariu, Dragos Florin
PROCEEDINGS OF THE 14TH INTERNATIONAL SCIENTIFIC CONFERENCE ELEARNING AND SOFTWARE FOR EDUCATION: ELEARNING CHALLENGES AND NEW HORIZONS, VOL 3, 2018, : 200 - 205
[22] Accessibility analysis for star probes in automatic inspection of rotational parts
Rico, JC
Valiño, G
Mateos, S
Cuesta, E
Suárez, CM
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2002, 40 (06) : 1493 - 1523
[23] Investigation of a process simulation method for flexible clamping of sheet metal parts
Bauer, Felix
Werber, Alexandra
Merklein, Marion
INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 1611 - 1616
[24] Process simulation model of a flexible clamping technology for sheet metal parts
Bauer, Felix
Werber, Alexandra
Seiberlich, Tobias
Merklein, Morion
17TH INTERNATIONAL CONFERENCE ON SHEET METAL (SHEMET17), 2017, 183 : 303 - 308
[25] Improving surface based clamping simulations by measuring the position of active surfaces during the clamping process
Drossel, W.
Wahl, M.
Schulz, F.
Mauermann, R.
Schuetzle, W.
Ackert, P.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 2312 - 2317
[26] AUTOMATIC DESCRIPTION OF SELECTION PROCESS
BELLMANN, K
GOSSEL, M
BIOMETRISCHE ZEITSCHRIFT, 1971, 13 (01): : 79 - &
[27] Multi-point Clamping with Automatic Collision Avoidance for Aircraft Structural Parts Machining
Liu, Haibo
Zhao, Liang
Li, Te
Hou, Bo
Wang, Yongqing
Ma, Yue
Jia, Zhenyuan
16TH MACHINING INNOVATIONS CONFERENCE FOR AEROSPACE INDUSTRY - MIC 2016, 2016, 6 : 33 - 38
[28] An automatic and optimal selection of parts orientation in additive manufacturing
Al-Ahmari, Abdurahman Mushabab
Abdulhameed, Osama
Khan, Awais Ahmad
RAPID PROTOTYPING JOURNAL, 2018, 24 (04) : 698 - 708
[29] The die turning injection (DTI) process for the fabrication of hollow parts
Lee, H. J.
Joo, B. D.
Moon, Y. B.
Van Tyne, C. J.
Moon, Y. H.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (04) : 808 - 816
[30] Selection of anticorrosion agents for internal surfaces of metal parts
Shekhter, Yu.N.
Tychkin, I.A.
Legezin, N.E.
Rebrov, I.Yu.
Murav'eva, S.A.
Muryzeva, N.O.
Khazandzhiev, S.M.
Khimiya i Tekhnologiya Topliv i Masel, 1997, (05): : 11 - 14

← 1 2 3 4 5 →