Study into the Improvement of Dynamic Stress Characteristics and Prototype Test of an Impeller Blade of an Axial-Flow Pump Based on Bidirectional Fluid-Structure Interaction

This paper performed a numerical study into the dynamic stress improvement of an axial-flow pump and validated the simulation results with a prototype test. To further analyze the dynamic stress characteristics of impeller blades of axial-flow pumps, a bidirectional fluid-structure interaction (FSI) was applied to numerical simulations of the unsteady three-dimensional (3-D) flow field of the whole flow system of an axial-flow pump, and the gravity effect was also taken into account. In addition, real-structure-based single-blade finite element model was established. By using the finite element method, a calculation of the blade's dynamic characteristics was conducted, and its dynamic stress distribution was determined based on the fourth strength theory. The numerical results were consistent with the prototype tests. In a rotation cycle, the dynamic stress of the blade showed a tendency of first increasing, and then decreasing, where the maximum value appeared in the third quadrant and the minimum appeared in the first quadrant in view of the gravity effect. A method for reducing the stress concentration near the root of impeller blades was presented, which would effectively alleviate the possibility of cracking in the unreliable region of blades. Simultaneously, an experimental method for the underwater measurement of the dynamic stress of prototypical hydraulic machinery was put forward, which could realize the underwater sealing of data acquisition instruments on rotating machinery and the offine collection of measured data, finally effectively measuring the stress of underwater moving objects.