Estimation of three-dimensional mean dihedral angle in a W-Ni-Fe alloy liquid-phase sintered in imicrogravity

被引：2

作者：

Goodwin, W. B. ^{[2
]}

Bharadwaj, M. ^{[3
]}

Mao, Y. ^{[1
]}

Gokhale, A. M. ^{[1
]}

Gurumurthy, A. ^{[1
]}

German, R. M. ^{[4
]}

机构：

[1] Georgia Inst Technol, Sch Mat Sci & Engn, Atlanta, GA 30332 USA

[2] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA

[3] Univ Idaho, Dept Mat Sci & Engn, Moscow, ID 83844 USA

[4] San Diego State Univ, Coll Engn, San Diego, CA 92812 USA

来源：

SCRIPTA MATERIALIA | 2009年 / 61卷 / 12期

基金：

美国国家科学基金会;

关键词：

Liquid-phase sintering; Image analysis; Powder processing; Dihedral angle; Tungsten heavy alloys; STEREOLOGY;

D O I：

10.1016/j.scriptamat.2009.08.043

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The three-dimensional mean dihedral angle of impinging W grains is estimated in a 50 wt.% W-35 wt.% Ni-15 wt.% Fe alloy liquid-phase sintered in microgravity at 1500 degrees C for times ranging from 1 to 600 min using unbiased stereology and automated image analysis. The estimated mean dihedral angles are in the range 50 +/- 3 degrees. The mean dihedral angle does not vary significantly with the liquid-phase sintering time, although the mean intercept size of the W grains increases almost by a factor of 5. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：1101 / 1104

页数：4

共 50 条

[41] Microstructure and mechanical properties of spark plasma-sintered La2O3dispersion-strengthened W-Ni-Fe alloy
AyyappaRaj, Muthuchamy
Yadav, Digvijay
Agrawal, Dinesh K.
Arunjunai Rajan, Raja Annamalai
RARE METALS, 2021, 40 (08) : 2230 - 2236
[42] GRAIN-GROWTH IN LIQUID-PHASE-SINTERED W-MO-NI-FE ALLOYS
KEMP, PB
GERMAN, RM
JOURNAL OF THE LESS-COMMON METALS, 1991, 175 (02): : 353 - 368
[43] Partition of tungsten in the matrix phase for liquid phase sintered 93%W-4.9%Ni-2.1%Fe
Chiou, YH
Zu, YS
Lin, ST
SCRIPTA MATERIALIA, 1996, 34 (01) : 135 - 140
[44] Liquid-phase sintering and densification of W-Ni-Fe-Cu heavy alloys at low temperature
Shen, Qiang
Wang, Chuanbin
Zhang, Lianmeng
Wuhan Gongye Daxue Xuebao/Journal of Wuhan University of Technology, 2000, 22 (01): : 1 - 3
[45] Effect of Strain Rate on the Plastic Deformation and Fracture of 90W-7Ni-3Fe Alloy Prepared by Liquid-Phase Sintering
Yang Yu
Ming Zu
Chaoyuan Ren
Wencong Zhang
Journal of Materials Engineering and Performance, 2018, 27 : 6606 - 6615
[46] Effect of Strain Rate on the Plastic Deformation and Fracture of 90W-7Ni-3Fe Alloy Prepared by Liquid-Phase Sintering
Yu, Yang
Zu, Ming
Ren, Chaoyuan
Zhang, Wencong
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (12) : 6606 - 6615
[47] Structure analysis of the constitutional phases in liquid phase sintered W-Mo-Ni-Fe heavy alloys
Lin, KH
Hsu, CS
Lin, ST
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2003, 21 (3-4): : 193 - 203
[48] Three-Dimensional Imaging of Phase Ordering in an Fe-Al Alloy by Bragg Ptychography
Kim, Chan
Chamard, Virginie
Hallmann, Joerg
Roth, Thomas
Lu, Wei
Boesenberg, Ulrike
Zozulya, Alexey
Leake, Steven
Madsen, Anders
PHYSICAL REVIEW LETTERS, 2018, 121 (25)
[49] A novel dissolution-precipitation mechanism during liquid phase sintering and its strengthening effects in W-Ni-Fe alloys with low W contents
Han, Yong
Li, Yuan
Ye, Lei
Du, Zhiyuan
Liu, Zhanggen
Li, Xin
Zhao, Ming-Chun
Atrens, Andrej
MATERIALS & DESIGN, 2022, 220
[50] Microstructure and mechanical characterizations of liquid phase sintered W-Ni-Cu heavy alloy modified with La2O3 and Fe addition
Shakunt, Navindra Shekhar
Gouthama
Upadhyaya, Anish
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2025, 127

← 1 2 3 4 5 →