Estimation of three-dimensional mean dihedral angle in a W-Ni-Fe alloy liquid-phase sintered in imicrogravity

被引：2
|
作者：
Goodwin, W. B. [2 ]
Bharadwaj, M. [3 ]
Mao, Y. [1 ]
Gokhale, A. M. [1 ]
Gurumurthy, A. [1 ]
German, R. M. [4 ]
机构：
[1] Georgia Inst Technol, Sch Mat Sci & Engn, Atlanta, GA 30332 USA
[2] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA
[3] Univ Idaho, Dept Mat Sci & Engn, Moscow, ID 83844 USA
[4] San Diego State Univ, Coll Engn, San Diego, CA 92812 USA
来源：
SCRIPTA MATERIALIA | 2009年 / 61卷 / 12期
基金：
美国国家科学基金会;
关键词：
Liquid-phase sintering; Image analysis; Powder processing; Dihedral angle; Tungsten heavy alloys; STEREOLOGY;
D O I：
10.1016/j.scriptamat.2009.08.043
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The three-dimensional mean dihedral angle of impinging W grains is estimated in a 50 wt.% W-35 wt.% Ni-15 wt.% Fe alloy liquid-phase sintered in microgravity at 1500 degrees C for times ranging from 1 to 600 min using unbiased stereology and automated image analysis. The estimated mean dihedral angles are in the range 50 +/- 3 degrees. The mean dihedral angle does not vary significantly with the liquid-phase sintering time, although the mean intercept size of the W grains increases almost by a factor of 5. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1101 / 1104
页数：4
相关论文
共 50 条
  • [1] PRECIPITATION IN A LIQUID-PHASE SINTERED W-NI-FE ALLOY
    MUDDLE, BC
    EDMONDS, DV
    ACTA METALLURGICA, 1985, 33 (12): : 2119 - 2128
  • [2] W/NiFe phase interfacial characteristics of liquid-phase sintered W-Ni-Fe alloy
    Zhu, Y. B.
    Wang, Y.
    Zhang, X. Y.
    Qin, G. W.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2007, 25 (04): : 275 - 279
  • [3] PROCESSING EFFECTS ON TOUGHNESS FOR LIQUID-PHASE SINTERED W-NI-FE
    GERMAN, RM
    HANAFEE, JE
    JOURNAL OF METALS, 1981, 33 (09): : A36 - A36
  • [4] INTERPHASE BOUNDARY PRECIPITATION IN LIQUID-PHASE SINTERED W-NI-FE AND W-NI-CU ALLOYS
    MUDDLE, BC
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1984, 15 (06): : 1089 - 1098
  • [5] MICROSTRUCTURAL CHANGE DURING LIQUID-PHASE SINTERING OF W-NI-FE ALLOY
    PARK, JK
    KANG, SJL
    EUN, KY
    YOON, DN
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (05): : 837 - 845
  • [6] APPROACHES TO IMPROVE MECHANICAL-PROPERTIES OF LIQUID-PHASE SINTERED W-NI-FE HEAVY ALLOYS
    ZUBILLAGA, C
    CASTRO, F
    URCOLA, JJ
    FUENTES, M
    ZEITSCHRIFT FUR METALLKUNDE, 1989, 80 (08): : 577 - 586
  • [7] PROCESSING EFFECTS ON TOUGHNESS FOR LIQUID-PHASE-SINTERED W-NI-FE
    GERMAN, RM
    HANAFEE, JE
    AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (08): : 853 - 853
  • [8] LIQUID FLOW INTO THE INTERIOR OF W-NI-FE COMPACTS DURING LIQUID-PHASE SINTERING
    KIM, YS
    PARK, JK
    YOON, DN
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1985, 21 (01): : 29 - &
  • [9] Transient Liquid-Phase Sintering Characteristic of W-Ni-Fe Alloy via Microwave-Assisted Heating
    Ma Yunzhu
    Zhang Jiajia
    Liu Wensheng
    Zhao Yaxu
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (09) : 2108 - 2111
  • [10] Transient liquid-phase sintering characteristic of W-Ni-Fe alloy via microwave-assisted heating
    Ma, Yunzhu, 1600, Science Press (43):
12345