Preparation and Properties of Short Oil Alkyd Resin/TiO2 Nanocomposites Based on Surface Modified TiO2 Nanoparticles

被引：8

作者：

Radoman, Tijana S. ^{[1
]}

Dzunuzovic, Jasna V. ^{[2
]}

Spasojevic, Pavle M. ^{[1
]}

Marinovic-Cincovic, Milena T. ^{[3
]}

Jeremic, Katarina B. ^{[4
]}

Popovic, Ivanka G. ^{[4
]}

Dzunuzovic, Enis S. ^{[4
]}

机构：

[1] Univ Belgrade, Fac Technol & Met, Innovat Ctr, Karnegijeva 4, Belgrade 11120, Serbia

[2] Univ Belgrade, ICTM, Ctr Chem, Studentski Trg 12-16, Belgrade 11000, Serbia

[3] Univ Belgrade, Vinca Inst Nucl Sci, POB 522, Belgrade 11001, Serbia

[4] Univ Belgrade, Fac Technol & Met, Karnegijeva 4, Belgrade 11120, Serbia

来源：

POLYMER COMPOSITES | 2018年 / 39卷 / 05期

关键词：

CORROSION BEHAVIOR; SUNFLOWER OIL; WATERBORNE COATINGS; RAPESEED OIL; RESISTANCE; PARTICLES; LINSEED; BARRIER; SIZE;

D O I：

10.1002/pc.24089

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Alkyd resin/TiO2 nanocomposites (NC) were prepared from short oil alkyd resin and TiO2 nanoparticles (NPs) surface modified with in situ formed imine ligand, based on 3,4-dihydroxybenzaldehyde and oleylamine, or with three gallic acid esters. The short oil alkyd resin was synthesized from sunflower oil, phthalic anhydride, and trimethylolpropane. Unmodified and surface modified TiO2 NPs were examined by transmission electron microscopy. Rheological investigation revealed that prepared dispersions have higher dynamic viscosity than pure alkyd resin. Using different characterization methods it was obtained that NCs have similar thermooxidative stability as alkyd resin, lower glass transition temperature, better barrier properties, enhanced hardness, better chemical resistance, and lower adhesion to the metal, except in the case of NC prepared using TiO2 NPs surface modified with imine, which exhibited better adhesion to the metal than pure alkyd resin. (C) 2016 Society of Plastics Engineers

引用

页码：1488 / 1499

页数：12

共 50 条

[41] Surface Texturing of TiO2 Film by Mist Deposition of TiO2 Nanoparticles
Gang Qin
Akira Watanabe
Nano-Micro Letters, 2013, 5 (2) : 129 - 134
[42] Surface Texturing of TiO2 Film by Mist Deposition of TiO2 Nanoparticles
Qin, Gang
Watanabe, Akira
NANO-MICRO LETTERS, 2013, 5 (02) : 129 - 134
[43] TiO2 nanocomposites: Preparation, characterization, mechanical and biological properties
Kosarsoy, Gozde
Sen, Elif Hilal
Aksoz, Nilufer
Ide, Semra
Aksoy, Husnu
APPLIED SURFACE SCIENCE, 2014, 318 : 269 - 274
[44] Study on preparation of NiZnCu ferrite/TiO2 nanocomposites and their properties
Li Yuan
Li Guijuan
Fan Shourui
Wang Kang
Guan Lei
PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS, VOLS 1 AND 2, 2009, : 1253 - 1255
[45] Surface modification of TiO2 nanoparticles and its effect on the properties of fluoropolymer/TiO2 nanocomposite coatings
Li, X. W.
Song, R. G.
Jiang, Y.
Wang, C.
Jiang, D.
APPLIED SURFACE SCIENCE, 2013, 276 : 761 - 768
[46] PLA Nanocomposites with Functionalized TiO2 Nanoparticles
Buzarovska, Aleksandra
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2013, 52 (03) : 280 - 286
[47] Preparation and characterization of PAN/TiO2 nanocomposites
Zhang, Jie
Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2014, 43 (11): : 2994 - 2998
[48] Phase Transition of TiO2 in TiO2/Montmorillonite Nanocomposites
Sun Hong-Juan
Liu Ying
Peng Tong-Jiang
Hu Ao-Hou
CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2011, 27 (03) : 403 - 408
[49] Bacteriostatic photocatalytic properties of cotton modified with TiO2 and TiO2/aminopropyltriethoxysilane
Brigita Tomšič
Vasko Jovanovski
Boris Orel
Mohor Mihelčič
Janez Kovač
Vojmir Francetič
Barbara Simončič
Cellulose, 2015, 22 : 3441 - 3463
[50] Preparation and properties of porous TiO2/HA/TiO2 composite coating
Zhang, Jingxian
Hong, Qiuhong
Sun, Xuetong
Zhang, Xinping
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2012, 26 (06): : 572 - 576

← 1 2 3 4 5 →