Influences of PM Number and Shape of Spoke Array PM Flux Reversal Machines

被引：9
|
作者：
Qu, Huan [1 ]
Zhu, Z. Q. [1 ]
Shuang, Bo [1 ]
机构：
[1] Univ Sheffield, Dept Elect & Elect Engn, Sheffield S10 2TN, S Yorkshire, England
来源：
IEEE TRANSACTIONS ON ENERGY CONVERSION | 2021年 / 36卷 / 02期
关键词：
Flux reversal; permanent magnet (PM); PM number; PM shape; spoke array; stator PM; DESIGN;
D O I：
10.1109/TEC.2020.3031030
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
Spoke array permanent magnet (PM) flux reversal machines (SAFRPMMs), which are suitable for low speed and high torque applications, are able to enhance torque density due to the flux focusing effect. In this paper, what influence both the number of PM per slot and the PM shape have on their electromagnetic performance are investigated. The results show that both the PM number and the PM shape have significant effects on the performance of SAFRPMMs, and proper selections are critical in designing high performance machines. When the PM number per slot is 2, the SAFRPMM exhibits the best electromagnetic performances, i.e., the highest torque, power, efficiency, and power factor. Meanwhile, by properly designing the PM shape, the torque can be further improved by around 11%. A prototype is made and tested to validate the analyses.
引用
收藏
页码：1131 / 1142
页数：12
相关论文
共 50 条
  • [41] Axial-Flux PM Machines With Variable Air Gap
    Vansompel, Hendrik
    Sergeant, Peter
    Dupre, Luc
    Van den Bossche, Alex
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (02) : 730 - 737
  • [42] Approach for analytical modelling of axial-flux PM machines
    Boroujeni, Samad Taghipour
    Mohammadi, Abdolmajid Abedini
    Oraee, Ashknaz
    Oraee, Hashem
    IET ELECTRIC POWER APPLICATIONS, 2016, 10 (06) : 441 - 450
  • [43] Influence of Flux Focusing on Electromagnetic Torque of Novel Biased Flux PM Machines
    Shi, J. T.
    Zhu, Z. Q.
    Wu, D.
    Liu, X.
    2014 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2014, : 523 - 529
  • [44] Performance Improvement in Flux-Switching PM Machines Using Flux Diverters
    Deodhar, Rajesh
    Pride, Adam
    Iwasaki, S.
    Bremner, Jonathan
    IEEE INTERNATIONAL CONFERENCE ON POWER ELECTRONICS, DRIVES AND ENERGY SYSTEMS (PEDES 2012), 2012,
  • [45] Performance of Partitioned Primary Linear Switched Flux PM Machines
    Lu, Qinfen
    Shi, Jiameng
    Huang, Xiaoyan
    Fang, Youtong
    Ye, Yunyue
    2016 XXII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2016, : 2486 - 2491
  • [46] Comparative study of hybrid-PM variable-flux machines with different series PM configurations
    Liu, Faliang
    Cheng, Luming
    Wang, Mingqiao
    Qiao, Guangyuan
    Zheng, Ping
    Yang, Hui
    AIP ADVANCES, 2019, 9 (12)
  • [47] Standstill Determination of PM Flux Linkage Based on Minimum Saliency Tracking for PM-SyR Machines
    Pescetto, Paolo
    Pellegrino, Gianmario
    2019 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2019, : 4888 - 4894
  • [48] Performance Comparison of Spoke Array Fault Tolerant PM Vernier Rim Driven Machine with Different Numbers of Flux Modulation Poles
    Qiao, Tianhuai
    Zhu, Jingwei
    Wang, Xiaoyi
    PROGRESS IN ELECTROMAGNETICS RESEARCH M, 2021, 105 : 55 - 65
  • [49] Performance comparison of spoke array fault tolerant pm vernier rim driven machine with different numbers of flux modulation poles
    Qiao, Tianhuai
    Zhu, Jingwei
    Wang, Xiaoyi
    Progress In Electromagnetics Research M, 2021, 105 : 55 - 65
  • [50] Permanent Magnet Material and Pulsating Torque Minimization in Spoke Type Interior PM Machines
    Du, Zhentao S.
    Lipo, Thomas A.
    2016 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2016,
12345