Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting

被引：98
|
作者：
Geenen, K. [1 ]
Roettger, A. [1 ]
Theisen, W. [1 ]
机构：
[1] Ruhr Univ Bochum, Inst Mat, Chair Mat Technol, Univ Str 150, D-44801 Bochum, Germany
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2017年 / 68卷 / 07期
关键词：
additive manufacturing; austenitic steel; corrosion resistance; hot-isostatic pressing; selective laser melting; STAINLESS-STEEL; MECHANICAL-PROPERTIES; POWDER; PARTS; MICROSTRUCTURE; 304L;
D O I：
10.1002/maco.201609210
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study investigated the corrosion behavior of grade 316L austenitic steel processed by casting, hot isostatic pressing (HIP), selective laser melting (SLM), and SLM+HIP. Electrochemical results showed that the SLM-densified specimen exhibited poorer corrosion resistance than specimens processed by casting and hot isostatic pressing in solution-annealed condition. Microstructural investigations revealed that the SLM-densified specimen had a fine-grained microstructure but comparatively higher porosity, which negatively influenced corrosion resistance. Additional HIP treatment further worsened corrosion resistance. The HIP process does not significantly reduce porosity compared to the SLM process, which can be attributed to the argon atmosphere used when manufacturing the SLM samples. Nevertheless, it was possible to reduce the crack density via HIP treatment and the formerly lamellar oxides underwent spheroidization.
引用
收藏
页码：764 / 775
页数：12
相关论文
共 50 条
  • [31] Selective Laser Melting of Metal Powder Of Steel 316l
    Smelov, V. G.
    Sotov, A. V.
    Agapovichev, A. V.
    Tomilina, T. M.
    VII INTERNATIONAL SCIENTIFIC PRACTICAL CONFERENCE INNOVATIVE TECHNOLOGIES IN ENGINEERING, 2016, 142
  • [32] The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion
    Grech, I. S.
    Sullivan, J. H.
    Lancaster, R. J.
    Plummer, J.
    Lavery, N. P.
    ADDITIVE MANUFACTURING, 2022, 58
  • [33] Interaction between laser radiation and metallic powder of 316L austenitic steel during selective laser melting
    Mutke, Christian
    Geenen, Karina
    Roettger, Arne
    Theisen, Werner
    MATERIALS CHARACTERIZATION, 2018, 145 : 337 - 346
  • [34] Biaxial tensile behavior of stainless steel 316L manufactured by selective laser melting
    Wang, Hao
    Shu, Xiaoyong
    Zhao, Jianping
    Alexandrov, I. V.
    SCIENTIFIC REPORTS, 2023, 13 (01)
  • [35] The Compressive Behavior of a Porous 316L Stainless Steel Prepared by Selective Laser Melting
    Liu, B.
    Zhao, Z. Y.
    Bai, P. K.
    Liang, M. J.
    Guan, R. G.
    LASERS IN ENGINEERING, 2019, 42 (4-6) : 381 - 390
  • [36] Spatter behavior for 316L stainless steel fabricated by selective laser melting in a vacuum
    Sato, Yuji
    Srisawadi, Sasitorn
    Tanprayoon, Dhritti
    Suga, Tetsuo
    Ohkubo, Tomomasa
    Tsukamoto, Masahiro
    OPTICS AND LASERS IN ENGINEERING, 2020, 134
  • [37] Biaxial tensile behavior of stainless steel 316L manufactured by selective laser melting
    Hao Wang
    Xiaoyong Shu
    Jianping Zhao
    I. V. Alexandrov
    Scientific Reports, 13
  • [38] Corrosion Behavior of Laser and GTAW Welded Austenitic Stainless Steel 316L in Lithium Bromide
    Aziz, Ahmed A.
    Momtaz, Ahmed M.
    Waraky, Ali E.
    OCHRONA PRZED KOROZJA, 2010, 53 (11): : 652 - 652
  • [39] Anisotropy in Microstructure and Impact Toughness of 316L Austenitic Stainless Steel Produced by Selective Laser Melting
    Zong Xuewen
    Liu Wenjie
    Yang Yumeng
    Zhang Shuzhe
    Chen Zhen
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (12) : 4031 - 4040
  • [40] ON THE MICROSTRUCTURAL EVOLUTION AND POROSITY CONSOLIDATION IN 316L STAINLESS STEEL DURING HOT ISOSTATIC PRESSING
    Cooper, Adam J.
    Tuck, Olivia C. G.
    Armson, Samuel A. J.
    Preuss, Michael
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 6A, 2019,
12345