Improving the Galling resistance of automotive stamping tools

被引：0

作者：

Fabijanic, DM ^{[1
]}

Barnett, M ^{[1
]}

Hodgson, PD ^{[1
]}

Cardew-Hall, M ^{[1
]}

机构：

[1] Deakin Univ, STAMP, Geelong, Vic 3217, Australia

来源：

METAL FORMING 2000 | 2000年

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Galling is a commonly encountered problem in the stamping of sheet metal. A form of adhesive wear, galling involves sheet material transfer to the forming tool, typically occurring in the drawing operation where sliding speeds and pressures are high. A production part from the Stamping Plant, Ford Motor Company, Australia, was chosen as a case study to determine the influence of die surface preparation and die surface modification on galling behaviour and part formability. Results indicated that production run length can be increased and part formability improved significantly by decreasing the roughness of the die and through surface modification.

引用

页码：641 / 646

页数：6

共 50 条

[41] Influence of temperature on galling resistance of SS 416
Harsha, A. P.
Limaye, P. K.
PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015, 2015, : 98 - 99
[42] HIGH GALLING RESISTANCE MARKS NEW STAINLESS
不详
MATERIALS ENGINEERING, 1974, 80 (07): : 38 - 38
[43] EXPERIMENTAL INVESTIGATION OF GALLING RESISTANCE IN OCTG CONNECTIONS
ERTAS, A
CARPER, HJ
CUVALCI, O
EKWAROOSIRE, S
BLACKSTONE, WR
JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1992, 114 (01): : 100 - 104
[44] Numerical Effectiveness of the Simulation of an Automotive Body Part Stamping
Stadnicki, Jacek
Wrobel, Ireneusz
ADVANCES IN MECHANICAL ENGINEERING, 2015, 7 (02)
[45] On the die face design for stamping an automotive engine hood
Chen, Ming-Zhi
Chen, Fuh-Kuo
Wang, Shi-Wei
Lin, Ching-, I
NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 389 - +
[46] Minimizing Splits in the Automotive Stamping Process by Logistic Regression
Wang, C.-Y.
Hancock, W. M.
1997, (09)
[47] Scheduling Methods for Efficient Stamping Operations at an Automotive Company
Gencosman, Burcu Caglar
Begen, Mehmet A.
Ozmutlu, Huseyin Cenk
Yilmaz, Imren Ozturk
PRODUCTION AND OPERATIONS MANAGEMENT, 2016, 25 (11) : 1902 - 1918
[48] Improvement of throughput and resource utilization in an automotive stamping plant
Williams, EJ
Zottolo, M
1ST INTERNATIONAL INDUSTRIAL SIMULATION CONFERENCE 2003, 2003, : 285 - 289
[49] On the die face design for stamping an automotive engine hood
Chen, Ming-Zhi
Wang, Shi-Wei
Lin, Ching-I
Chen, Fuh-Kuo
36TH IDDRG CONFERENCE - MATERIALS MODELLING AND TESTING FOR SHEET METAL FORMING, 2017, 896
[50] Automatic Algorithm of Automotive Stamping Direction based on GA
Liu Ruijun
MECHATRONICS AND INDUSTRIAL INFORMATICS, PTS 1-4, 2013, 321-324 : 2187 - 2190

← 1 2 3 4 5 →