The EPR nuclear island - Technological solutions developed during basic design

被引:0
|
作者
Fischer, U [1 ]
Bouteille, F [1 ]
机构
[1] Nucl Power Int, F-92064 Paris La Def, France
来源
EUROPEAN PRESSURIZED WATER REACTOR EPR, PROCEEDINGS | 1997年
关键词
D O I
暂无
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
The work which was performed during the Basic Design allows a precise definition of the Nuclear Island. A preliminary Safety Analysis Report (Basic Design Report-BDR) and detailed bill of quantities are now available. The BDR will be the basis of the continuation of the assessment by the French and German Safety Authorities of the proposed design. This paper will illustrate some of the main highlights of the work performed by the four co-designers EDF-CNEN, Framatome, NPI and Siemens during the twenty eight months of the Basic Design during which the work progressed exactly on schedule. A lot of efforts were developed during this phase for the improvement of the performance of the plant. In particular, the increase of the availability (better than 90 %) was one of the main topics which were analysed during the Basic Design. The system architecture which was defined during the conceptual phase was confirmed to be a good basis to reach this ambitious target. The organization scheme between the codesigners and the utilities through Working Groups for all the main engineering disciplines allowed thorough exchanges which produced fruitful results and which allowed to meet the expected targets. At the end of this phase, a significant technical data base is now available for the continuation of the work to meet the utilities needs.
引用
收藏
页码:37 / 54
页数:18
相关论文
共 50 条
  • [31] Nonspecific nuclear immunoreactivity after antigen retrieval using acidic and basic solutions
    Wieczorek, R
    Stover, R
    Sebenik, M
    JOURNAL OF HISTOTECHNOLOGY, 1997, 20 (02) : 139 - 143
  • [32] OVERVIEW ON THE DESIGN APPROACH FOR THE CVCS I & C OF THE EPR™ NUCLEAR POWER PLANT IN TAISHAN
    Ciriello, Antonio
    Kohler, Daniela
    Morton, Terry
    Lang, Thomas
    PROCEEDINGS OF THE 21ST INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING - 2013, VOL 2, 2014,
  • [33] Experience of Using Traditional and New Technological Solutions in Nuclear Power Engineering Paper Discussion
    M. E. Khalizeva
    Herald of the Russian Academy of Sciences, 2020, 90 : 388 - 394
  • [34] Experience of Using Traditional and New Technological Solutions in Nuclear Power Engineering Paper Discussion
    Khalizeva, M. E.
    HERALD OF THE RUSSIAN ACADEMY OF SCIENCES, 2020, 90 (04) : 388 - 394
  • [35] Design and technological solutions for the plasma facing components of WENDELSTEIN 7-X
    Boscary, J.
    Stadler, R.
    Peacock, A.
    Hurd, F.
    Vorkoeper, A.
    Mendelevitch, B.
    Cardella, A.
    Pirsch, H.
    Tittes, H.
    Tretter, J.
    Li, C.
    Greuner, H.
    Smirnow, M.
    FUSION ENGINEERING AND DESIGN, 2011, 86 (6-8) : 572 - 575
  • [36] Virtual worlds and the design enterprise: Post-technological challenges and proposed solutions
    Jacobson, B
    VSMM 2001: SEVENTH INTERNATIONAL CONFERENCE ON VIRTUAL SYSTEMS AND MULTIMEDIA, PROCEEDINGS: ENHANCED REALITIES: AUGMENTED AND UNPLUGGED, 2001, : 757 - 760
  • [37] GUEST EDITORIAL: SPACE INFORMATION NETWORKS: TECHNOLOGICAL CHALLENGES, DESIGN ISSUES, AND SOLUTIONS
    Xue, Kaiping
    de Cola, Tomaso
    Wei, David S. L.
    Perez-Neira, Ana
    Hassanein, Hossam S.
    Kuang, Linling
    Chatzinotas, Symeon
    IEEE NETWORK, 2021, 35 (04): : 16 - 18
  • [38] New Technological and Design Solutions for Devices for Producing a Continuously Cast Deformed Billet
    V. I. Odinokov
    A. I. Evstigneev
    E. A. Dmitriev
    D. A. Potianikhin
    A. E. Kvashnin
    Metallurgist, 2023, 67 : 104 - 110
  • [39] Technological solutions for the computer-aided design and manufacturing of a remotely piloted aircraft
    Urbahs, Aleksandrs
    Urbaha, Margarita
    Carjova, Kristine
    Koruba, Zbigniew
    ICTE IN TRANSPORTATION AND LOGISTICS 2018 (ICTE 2018), 2019, 149 : 390 - 397
  • [40] New Technological and Design Solutions for Devices for Producing a Continuously Cast Deformed Billet
    Odinokov, V. I.
    Evstigneev, A. I.
    Dmitriev, E. A.
    Potianikhin, D. A.
    Kvashnin, A. E.
    METALLURGIST, 2023, 67 (1-2) : 104 - 110