Copper Penetration of a Lance in a Smelting Furnace of the Mitsubishi Process

被引：4

作者：

Lim, Sung-Mi ^{[1
]}

Yi, Kyung-Woo ^{[1
,2
]}

机构：

[1] Seoul Natl Univ, Dept Mat Sci & Engn, 1 Gwanakro, Seoul 151742, South Korea

[2] Seoul Natl Univ, Res Inst Adv Mat, 1 Gwanak Ro, Seoul 151742, South Korea

来源：

METALS AND MATERIALS INTERNATIONAL | 2022年 / 28卷 / 04期

关键词：

Smelting furnace; Thermodynamics analysis; Surface erosion of high Cr steel; Fracture of lance; Cu penetration phenomena;

D O I：

10.1007/s12540-020-00959-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study was aimed to determine the main cause of lance fracture in a smelting furnace of the Mitsubishi continuous process for Cu production. Investigation of lances used in field operations, thermodynamic analysis and laboratory experiments were conducted. By analyzing the lances, damaged surface of the lances and penetration of matte components into the lance were observed. The depth of damage was strongly dependent on the lance height which was related to temperature. To determine the temperature of the lance fracture, thermodynamics calculations and laboratory experiments were conducted. Both results showed that the formation of Cu liquids above 1100 degrees C could be the main cause of lance fracture during operation of Cu smelting furnaces of the Mitsubishi process. Graphic

引用

页码：907 / 918

页数：12

共 50 条

[31] TOP-BLOWN INJECTION SMELTING AND CONVERTING - THE MITSUBISHI PROCESS
SHIBASAKI, T
HAYASHI, M
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1991, 43 (09): : 20 - 26
[32] Comparison of Copper Smelting Slags Between Flash Smelting Furnace and Bottom-Blowing Furnace
Liao, Jinfa
Liao, Chunfa
Zhao, Baojun
12TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2022, : 249 - 259
[33] Electric furnace lance maintenance - a critical process
Rymarchyk Jr., N.
Paules, J.R.
Iron and Steelmaker (I and SM), 1996, 23 (03): : 79 - 82
[34] Characterization of Copper Smelting Flue Dusts from a Bottom-Blowing Bath Smelting Furnace and a Flash Smelting Furnace
Yujie Chen
Zongwen Zhao
Pekka Taskinen
Yanjie Liang
Hongchuan Ouyang
Bing Peng
Ari Jokilaakso
Songlin Zhou
Tao Chen
Ning Peng
Hui Liu
Metallurgical and Materials Transactions B, 2020, 51 : 2596 - 2608
[35] Characterization of Copper Smelting Flue Dusts from a Bottom-Blowing Bath Smelting Furnace and a Flash Smelting Furnace
Chen, Yujie
Zhao, Zongwen
Taskinen, Pekka
Liang, Yanjie
Ouyang, Hongchuan
Peng, Bing
Jokilaakso, Ari
Zhou, Songlin
Chen, Tao
Peng, Ning
Liu, Hui
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2020, 51 (06): : 2596 - 2608
[36] Effect of oxygen lance seat arrangement on flow characteristics of large-scale copper smelting bottom-blown furnace
Guo, Xue-yi
Jiang, Bao-cheng
Chen, Jun-hua
Wang, Qin-meng
JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2023, 30 (08) : 2542 - 2555
[37] Suggested improvements for smelting copper in the reverberatory furnace
Oldrightt, GL
Schroeder, FW
TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1928, 76 : 442 - 461
[38] Distribution behavior of arsenic, antimony and bismuth in the smelting stage of the mitsubishi process
Surapunt, S
Hasegawa, N
METALLURGICAL AND MATERIALS PROCESSING: PRINCIPLES AND TECHNOLOGIES, VOL 1: MATERIALS PROCESSING FUNDAMENTALS AND NEW TECHNOLOGIES, 2003, : 375 - 381
[39] EFFECT OF INJECTION SMELTING JET CHARACTERISTICS ON REFRACTORY WEAR IN THE MITSUBISHI PROCESS
GOTO, M
ECHIGOYA, T
JOURNAL OF METALS, 1980, 32 (11): : 6 - 11
[40] Simulation of Copper Smelting Furnace with a Top Submerged Lance Based on Key-Field-Coupling, Part 1: Multiphase Fluid Flow
Cai, Xiaoyi
Wang, Wei
Zhao, Hongliang
Liu, Fengqin
Lv, Chao
Sohn, Hong Yong
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2025, : 1684 - 1698

← 1 2 3 4 5 →