Shear modulus of single wood pulp fibers from torsion tests

被引:6
|
作者
Dauer, M. [1 ,2 ]
Wolfbauer, A. [1 ]
Seidlhofer, T. [1 ,2 ]
Hirn, U. [1 ,2 ]
机构
[1] Graz Univ Technol, Inst Paper Pulp & Fiber Technol, Inffeldgasse 23, A-8010 Graz, Austria
[2] Graz Univ Technol, Christian Doppler Lab Fiber Swelling & Paper Perf, Inffeldgasse 23, A-8010 Graz, Austria
关键词
Shear modulus; Pulp fiber; Permanent magnet moving coil instrument; Taut band; Torsion theory;
D O I
10.1007/s10570-021-04027-x
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
The shear modulus of pulp fibers is difficult to measure and only very little literature is available on this topic. In this work we are introducing a method to measure this fiber property utilizing a custom built instrument. From the geometry of the fiber cross section, the fiber twisting angle and the applied torque, the shear modulus is derived by de Saint Venant's theory of torsion. The deformation of the fiber is applied by a moving coil mechanism. The support of the rotating part consists of taut bands, making it nearly frictionless, which allows easy control of the torque to twist the fiber. A permanent magnet moving coil meter was fitted with a sample holder for fibers and torque references. Measurements on fine metal bands were performed to validate the instrument. The irregular shape of the fibers was reconstructed from several microtome cuts and an apparent torsion constant was computed by applying de Saint Venant's torsion theory. Fibers from two types of industrial pulp were measured: thermomechanical pulp (TMP) and Kraft pulp. The average shear modulus was determined as (2.13 +/- 0.36) GPa for TMP and (2.51 +/- 0.50) GPa for Kraft fibers, respectively. The TMP fibers showed a smaller shear modulus but, due to their less collapsed state, a higher torsional rigidity than the kraft fibers.
引用
收藏
页码:8043 / 8054
页数:12
相关论文
共 50 条
  • [21] Measurement of the shear modulus of wood by asymmetric four-point bending tests
    Yoshihara, H
    Kubojima, Y
    JOURNAL OF WOOD SCIENCE, 2002, 48 (01) : 14 - 19
  • [22] EFFECT OF SPECIMEN WIDTH ON SHEAR MODULUS OF WOOD OBTAINED BY FLEXURAL VIBRATION TESTS
    Kubojima, Yoshitaka
    Tonosaki, Mario
    WOOD AND FIBER SCIENCE, 2013, 45 (02): : 170 - 177
  • [23] Shear and longitudinal modulus of elasticity in wood: relations based on static bending tests
    Rocco Lahr, Francisco Antonio
    Christoforo, Andre Luis
    Varanda, Luciano Donizeti
    Chahud, Eduardo
    De Araujo, Victor Almeida
    Melgaco Nunes Branco, Luiz Antonio
    ACTA SCIENTIARUM-TECHNOLOGY, 2017, 39 (04) : 433 - 437
  • [24] UNDRAINED MODULUS FROM VANE SHEAR TESTS - CLOSURE
    MADHAV, MR
    KRISHNA, KSR
    JOURNAL OF THE GEOTECHNICAL ENGINEERING DIVISION-ASCE, 1979, 105 (11): : 1365 - 1365
  • [25] Shear moduli of structural composites from torsion tests
    Davalos, JF
    Qiao, PZ
    Wang, JL
    Salim, HA
    Schlussel, J
    JOURNAL OF COMPOSITE MATERIALS, 2002, 36 (10) : 1151 - 1173
  • [26] DYNAMIC WETTABILITY PROPERTIES OF SINGLE WOOD PULP FIBERS AND THEIR RELATIONSHIP TO ABSORBENCY
    HODGSON, KT
    BERG, JC
    WOOD AND FIBER SCIENCE, 1988, 20 (01): : 3 - 17
  • [27] DETERMINATION OF MODULUS OF SHEAR OF SPRUCE WOOD
    BELDIE, IP
    HOLZ ALS ROH-UND WERKSTOFF, 1968, 26 (07) : 261 - &
  • [28] A MODIFIED TORSION PENDULUM FOR MEASURING THE SHEAR MODULUS OF A SINGLE MICRO-SIZED FILAMENT
    Liu, Dabiao
    He, Yuming
    Hu, Peng
    Gan, Zhipeng
    Ding, Huaming
    ACTA MECHANICA SOLIDA SINICA, 2014, 27 (03) : 221 - 233
  • [29] The effect of treatments on the shear modulus of human hair measured by the single fiber torsion pendulum
    Harper, D. L.
    Kamath, Y. K.
    JOURNAL OF COSMETIC SCIENCE, 2007, 58 (04) : 329 - 337
  • [30] A MODIFIED TORSION PENDULUM FOR MEASURING THE SHEAR MODULUS OF A SINGLE MICRO-SIZED FILAMENT
    Dabiao Liu
    Yuming He
    Peng Hu
    Zhipeng Gan
    Huaming Ding
    ActaMechanicaSolidaSinica, 2014, 27 (03) : 221 - 233