Real time durability of tribofilms in the piston ring - cylinder liner contact

被引:16
|
作者
Spiller, S. [1 ]
Lenauer, C. [1 ]
Wopelka, T. [1 ]
Jech, M. [1 ]
机构
[1] AC2T Res GmbH, Viktor Kaplan Str 2, A-2700 Wiener Neustadt, Austria
关键词
XPS; Radioactive isotope wear measurement; Tribofilm; ZDDP; RAY-ABSORPTION-SPECTROSCOPY; ANTIWEAR FILMS; ENGINE OILS; PART; CHEMICAL-CHARACTERIZATION; ADDITIVE INTERACTIONS; WEAR; ZDDP; MECHANISM; THICKNESS;
D O I
10.1016/j.triboint.2016.12.002
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In boundary lubrication, the ability to form protective tribofilms determines the effectiveness of lubricants regarding friction and wear. In order to be able to control tribofilm formation, even if additives have to be reduced due to environmental regulations, the dynamics of the tribofilrn protection of surfaces are investigated. This study investigates the durability of the tribofilm formed on the cylinder liner piston ring contact and the corresponding wear protection capability in real time. To accomplish this, additivated engine oil was replaced by a non-additivated oil during test runs, after the steady-state wear rate had been reached. For the analysis of the tribofilm durability, the chemical composition of worn surfaces is compared to the dynamic wear and friction behavior.
引用
收藏
页码:92 / 100
页数:9
相关论文
共 50 条
  • [21] Effect of laser textured dimples on tribological behavior of piston ring and cylinder liner contact at varying load
    Patil, Atulkumar S.
    Shirsat, U. M.
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 1005 - 1020
  • [22] A semi-deterministic texture-roughness model of the piston ring-cylinder liner contact
    Spencer, A.
    Almqvist, A.
    Larsson, R.
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2011, 225 (06)
  • [23] Study on Influence of Cylinder Liner Surface Texture on Lubrication Performance for Cylinder Liner-Piston Ring Components
    Guo, Zhiwei
    Yuan, Chengqing
    Liu, Peng
    Peng, Zhongxiao
    Yan, Xinping
    TRIBOLOGY LETTERS, 2013, 51 (01) : 9 - 23
  • [24] Effects of different surface grooved cylinder liner on the tribological performance for cylinder liner-piston ring components
    Miao, Jiazhi
    Li, Yongqing
    Rao, Xiang
    Zhu, Libao
    Guo, Zhiwei
    Yuan, Chengqing
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2020, 72 (05) : 581 - 588
  • [25] Cavitating Flow in Engine Piston Ring-Cylinder Liner Conjunction
    Shahmohamadi, Hamed
    Rahmani, Ramin
    Rahnejat, Homer
    King, Paul
    Garner, Colin
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 7A, 2014,
  • [26] The behaviour of inlet roughness in lubrication of piston ring-cylinder liner
    Liu, K
    Tonder, K
    SCIENCE IN CHINA SERIES A-MATHEMATICS, 2001, 44 : 14 - 19
  • [27] Looking into a laser textured piston ring-liner contact
    Vladescu, Sorin-Cristian
    Ciniero, Alessandra
    Tufail, Khizer
    Gangopadhyay, Arup
    Reddyhoff, Tom
    TRIBOLOGY INTERNATIONAL, 2017, 115 : 140 - 153
  • [28] Scuffing failure analysis and experimental simulation of piston ring–cylinder liner
    K. Liu
    X.J. Liu
    C.L. Gui
    Tribology Letters, 1998, 5 : 309 - 312
  • [29] The behaviour of inlet roughness in lubrication of piston ring-cylinder liner
    KristianTφNDER
    ScienceinChina,SerA., 2001, Ser.A.2001(S1) (S1) : 14 - 19
  • [30] Cylinder liner deformation orders and efficiency of a piston ring-pack
    Selmani, Erjon
    Delprete, Cristiana
    Bisha, Arian
    3RD INTERNATIONAL CONFERENCE ON POWER, ENERGY AND MECHANICAL ENGINEERING (ICPEME 2019), 2019, 95