EFFECT OF CHEMICAL TREATMENT ON RICE HUSK (RH) REINFORCED POLYETHYLENE (PE) COMPOSITES

被引：1

作者：

Rahman, Md. Rezaur ^{[1
]}

Islam, Md. Nazrul ^{[1
]}

Huque, Md. Monimul ^{[1
]}

Hamdan, Sinin ^{[2
]}

Ahmed, Abu Saleh ^{[2
]}

机构：

[1] Bangladesh Univ Engn & Technol, Dept Chem, Dhaka, Bangladesh

[2] Univ Malaysia Sarawak, Fac Engn, Kota Samarahan 94300, Sarawak, Malaysia

来源：

BIORESOURCES | 2010年 / 5卷 / 02期

关键词：

Polymer matrix composites (PMCs); Mechanical properties; Scanning electron microscopy; Injection moulding; FILLED POLYPROPYLENE COMPOSITES; MECHANICAL-PROPERTIES; JUTE;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

In this study rice husk reinforced polyethylene composites and their test specimens were manufactured using a single screw extruder and an injection molding machine, respectively. Raw rice husk was chemically treated with benzene diazonium salt in alkali, acidic, and neutral media, in order to improve in the mechanical properties. The mechanical properties of the composites prepared from alkaline media treated rice husk were found to increase substantially compared to those of acidic media, neutral media, and untreated ones. However, the values for the alkaline media treated rice husk-PE composites at all mixing ratios were found to be higher than those of treated acidic media, treated neutral media, and untreated rice husk composites respectively. The SEM micrographs reveal that interfacial bonding between the treated filler and the matrix has significantly improved, suggesting that better dispersion of the filler into the matrix was achieved upon treatment of rice husk. Based on filler loading, 35% filler reinforced composites had the optimum set of mechanical properties among all composites manufactured.

引用

页码：854 / 869

页数：16

共 50 条

[21] Optimisation of material compositions for flammability characteristics in rice husk/polyethylene composites
Bilal, Ahmad
Lin, Richard J. T.
Jayaraman, Krishnan
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2014, 33 (22) : 2021 - 2033
[22] Banana fiber reinforced low-density polyethylene composites: effect of chemical treatment and compatibilizer addition
Nirupama Prasad
Vijay Kumar Agarwal
Shishir Sinha
Iranian Polymer Journal, 2016, 25 : 229 - 241
[23] Banana fiber reinforced low-density polyethylene composites: effect of chemical treatment and compatibilizer addition
Prasad, Nirupama
Agarwal, Vijay Kumar
Sinha, Shishir
IRANIAN POLYMER JOURNAL, 2016, 25 (03) : 229 - 241
[24] Effect of chemical blowing agent on the hygroscopic behavior of HDPE/rice husk flour composites
Kord, Behzad
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2013, 26 (08) : 1114 - 1126
[25] Rice husk reinforced polypropylene composites: mechanical, morphological and thermal properties
Raghu N.
Kale A.
Chauhan S.
Aggarwal P.K.
Journal of the Indian Academy of Wood Science, 2018, 15 (1) : 96 - 104
[26] Aluminum metal matrix composites reinforced with rice husk ash: A review
Dixit, Priyank
Suhane, Amit
MATERIALS TODAY-PROCEEDINGS, 2022, 62 (4194-4201) : 4194 - 4201
[27] Thermal Characterization of Low Density Polyethylene (LDPE)/ Rice Husk Ash and Rice Husk Ash Derived Silica Aerogel Composites
Zulkipli, Ahmad Hanifah
Romli, Ahmad Zafir
NATIONAL SYMPOSIUM ON POLYMERIC MATERIALS (NSPM 2017), 2018, 1985
[28] Evaluation of corn husk fibers reinforced recycled low density polyethylene composites
Youssef, Ahmed M.
El-Gendy, Ahmed
Kamel, Samir
MATERIALS CHEMISTRY AND PHYSICS, 2015, 152 : 26 - 33
[29] The mechanical and physical properties of polyurethane composites based on rice husk and polyethylene glycol
Rozman, HD
Yeo, YS
Tay, GS
Abubakar, A
POLYMER TESTING, 2003, 22 (06) : 617 - 623
[30] Static and Dynamic Mechanical Properties of Rice Husk (RH)/Linear Low Density Polyethylene (LLDPE) Composites under Various Loading Rates
Wahab, Nur Suhaili Abdul
Omar, Mohd Firdaus
Akil, Hazizan Md
Zulkepli, Nik Noriman
Abdullah, Mohd Mustafa Al Bakri
Sandu, Ion
MATERIALE PLASTICE, 2016, 53 (01) : 42 - 47

← 1 2 3 4 5 →