Simulation of hot compression of Ti-Al alloy

被引：12
|
作者：
Huang, Jin-Song [1 ]
Huang, Lan [1 ]
Liu, Bin [1 ]
Zhang, Yong-Hong [1 ]
Zhang, Wei [1 ]
He, Xiao-Yu [1 ]
Liu, Yong [1 ]
机构：
[1] Cent S Univ, State Key Lab PM, Changsha 410083, Hunan, Peoples R China
来源：
INTERMETALLICS | 2007年 / 15卷 / 5-6期
关键词：
TiAl alloy; hot simulation; compression; can; macrostructure; microstructure;
D O I：
10.1016/j.intermet.2006.10.019
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Hot compressive experiments of Ti-45Al-7Nb-0.15B-0.4W (mole fraction, %) alloy canned by 45(#) carbon steel were conducted at 1050-1230 degrees C on Gleeble1500 hot simulator with nominal deformation of 30% and strain rate of 0.01 s(-1). The displacement-loading curves were obtained, and the macrostructure and microstructure were observed. The results show that the hot compressive temperature of TiAl alloy must be higher than 1050 degrees C and lower than 1230 degrees C with 45(#) steel can, and its optimum temperature is 1180 degrees C. The highest actual deformation of TiAl alloy canned by 45(#) steel is 50% with nominal deformation of 30%. The grains after being hotly compressed are flattened and elongated. (c) 2007 Published by Elsevier Ltd.
引用
收藏
页码：700 / 705
页数：6
相关论文
共 50 条
  • [31] Creep-induced phase transformations in a Ti-Al alloy
    Du, XW
    Zhu, J
    Wang, B
    Kim, YW
    PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 2002, 82 (01): : 39 - 50
  • [32] Elemental blended powder semisolid forming on Ti-Al alloy
    Yasue, K
    Yu, GL
    Niinomi, M
    NON-AEROSPACE APPLICATIONS OF TITANIUM, 1998, : 81 - 88
  • [33] Research on prediction of microporosity in Ti-Al alloy investment casting
    Liang, ZJ
    Xu, QY
    Li, JT
    Li, SQ
    Zhang, J
    Liu, BC
    Zhong, ZY
    ACTA METALLURGICA SINICA, 2003, 39 (03) : 278 - 282
  • [34] Preparation and characteristics of Ti-Al based alloy porous material
    Huang, Hujun
    He, Yuehui
    Jiang, Yao
    Huang, Baiyun
    Xu, Nanping
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2007, 21 (04): : 337 - 342
  • [35] Synthesis of Ti-Al alloy by mechanical alloying and its microstructure
    Nobuki, Tohru
    Kuji, Toshiro
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2008, 72 (03) : 236 - 243
  • [36] Ti-Al合金
    窦健敏
    稀有金属, 1989, (06) : 484 - 484
  • [37] A molecular dynamics simulation-based laser melting behavior analysis for Ti-Al binary alloy
    Wang, Lei
    Chen, Yaru
    Xia, Xuhui
    Zhang, Zelin
    Wang, Tong
    Zhang, Huan
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2023, 37 (20):
  • [38] Molecular-dynamics simulation of the synthesis of intermetallic Ti-Al
    Kiselev, S. P.
    Zhirov, E. V.
    INTERMETALLICS, 2014, 49 : 106 - 114
  • [39] Probing into diffusion bonding of laser surface treated γ-Ti-Al alloy/Ti-6Al-4V alloy
    Wang, X. F.
    Luo, Z. C.
    Liu, X. B.
    Lin, J. G.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (05) : 452 - 455
  • [40] Multiscale γ variant selection in a quaternary near-γ Ti-Al alloy
    Dey, S. R.
    Hazotte, A.
    Bouzy, E.
    PHILOSOPHICAL MAGAZINE, 2006, 86 (20) : 3089 - 3112
12345