Resonators using a Lamb wave on AT-cut quartz

被引：7

作者：

Nakagawa, Yasuhiko ^{[1
]}

Momose, Masayuki ^{[1
]}

Kakio, Shoji ^{[1
]}

机构：

[1] Univ Yamanashi, Interdisciplinary Grad Sch Med & Engn, Kofu, Yamanashi 4008511, Japan

来源：

JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS | 2007年 / 46卷 / 7B期

关键词：

plate mode wave; Lamb wave; resonator; AT-cut quartz;

D O I：

10.1143/JJAP.46.4665

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

We applied a plate mode wave (Lamb wave) to a high-frequency resonator. A Lamb wave in an acoustic bulk mode is excited faster than a surface acoustic wave in an extremely thin quartz substrate. The thickness of the substrate is comparable to the wavelength of the Lamb wave. This fact enables the fabrication of a high-frequency resonator that is operable at a high-frequency range, which cannot be achieved using a conventional quartz oscillator. In this manuscript, we present a discussion and comparison of an analytical procedure with experimental results.

引用

页码：4665 / 4668

页数：4

共 50 条

[21] Design, Fabrication and Characterization of Compact Force Sensor Using AT-cut Quartz Crystal Resonators
Asakura, Ayumi
Fukuda, Toshio
Arai, Fumihito
2008 IEEE/RSJ INTERNATIONAL CONFERENCE ON ROBOTS AND INTELLIGENT SYSTEMS, VOLS 1-3, CONFERENCE PROCEEDINGS, 2008, : 506 - 511
[22] Stress Sensitivity of Micromachined AT-cut Quartz Resonators Characterized using Magnetostrictive Metglas Films
Goel, Nishit
Tadigadapa, Srinivas
2018 IEEE SENSORS, 2018, : 1644 - 1647
[23] Suppression of lower harmonic responses on overtone AT-cut quartz crystal resonators
Hirama, K
Shoji, T
Tanaka, Y
ELECTRONICS AND COMMUNICATIONS IN JAPAN PART III-FUNDAMENTAL ELECTRONIC SCIENCE, 2000, 83 (04): : 92 - 102
[24] A Few Transient Effects in AT-Cut Quartz Thickness-Shear Resonators
Zhang, Runyu
Hu, Hongping
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2011, 58 (12) : 2758 - 2762
[25] High Q-factor STW-resonators on AT-cut of quartz
Kim, C. U.
Plessky, V. P.
Wang, W.
Grigorlevski, V. I.
2007 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1-6, 2007, : 2582 - +
[26] Frequency-temperature analysis of MEMS AT-cut quartz resonators.
Yong, YK
Vig, J
Ballato, A
Kubena, R
Closkey, RM
PROCEEDINGS OF THE 2003 IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM & PDA EXHIBITION JOINTLY WITH 17TH EUROPEAN FREQUENCY AND TIME FORUM, 2003, : 1095 - 1099
[27] Electrical behaviour of AT-cut quartz crystal resonators as a function of overtone number
Cassiede, M.
Paillol, J. H.
Pauly, J.
Daridon, J. -L.
SENSORS AND ACTUATORS A-PHYSICAL, 2010, 159 (02) : 174 - 183
[28] FREQUENCY-DISTRIBUTION OF ANHARMONIC RESONANCES IN CONTOURED AT-CUT QUARTZ RESONATORS
SLAVOV, S
DOKLADI NA BOLGARSKATA AKADEMIYA NA NAUKITE, 1989, 42 (03): : 45 - 48
[29] Effects of Air Resistance on AT-Cut Quartz Thickness-Shear Resonators
Chen, Yangyang
Wang, Ji
Du, Jianke
Zhang, Weiping
Yang, Jiashi
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2013, 60 (02) : 402 - 407
[30] Forced vibrations of the fundamental family of modes in AT-cut quartz strip resonators
Tiersten, HF
Sham, TL
JOURNAL OF APPLIED PHYSICS, 2001, 89 (01) : 575 - 585

← 1 2 3 4 5 →