Constitutive model for quasi-static deformation of metallic sandwich cores

All-metal sandwich construction holds promise for significant improvements in stiffness, strength and blast resistance for built-up plate structures. Analysis of the performance of sandwich plates under various loads, static and dynamic, requires modelling of face sheets and core with some fidelity. While it is possible to model full geometric details of the core for a few selected problems, this is unnecessary and unrealistic for larger complex structures under general loadings. In this paper, a continuum constitutive model is proposed as an alternative means of modelling the core. The constitutive model falls within the framework of a compressible rate-independent, anisotropic elastic-plastic solid. The general form of the model is presented, along with algorithmic aspects of its implementation in a finite element code, and selected problems are solved which benchmark the code against existing codes for limiting cases and which illustrate features specific to compressible cores. Three core geometries (pyramidal truss, folded plate, and square honeycomb) are considered in some detail. The validity of the approach is established by comparing numerical finite element simulations using the model with those obtained by a full three-dimensional meshing of the core geometry for each of the three types of cores for a clamped sandwich plate subject to uniform pressure load. Limitations of the model are also discussed. Copyright (C) 2004 John Wiley Sons, Ltd.